Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- TSCA Inventory status
- Listed
- CAS No.
- 13253-82-2
- Molecular formula
- C₁₄H₂₆N₂O₂
- EC No.
- 236-239-4
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Uses
While levels from 1.8 to 2.2 p.h.r. of INTERCURE®4 meet a wide range of needs, a 2 p.h.r. level provides an optimum balance of safe processing, cure rate and physical properties
Properties
- Appearance
- Fine white powder
- Odor
- Slight amine
- Slightly Soluble in
- Water
- Soluble in
- Acidic solutions
- Typical Properties
Value | Units | Test Method / Conditions | |
Purity | min. 97 | % | — |
Specific Gravity (25/4°C) | 1.21 - 1.25 | — | — |
Decomposition Point | min. 150 | °C | — |
Ash Content | max. 0.05 | % | — |
Moisture Content | max. 1.5 | % | — |
Particle Size (< 15μm) | min. 95 | % Volume | — |
Particle Size (< 30μm) | 100 | % Volume | — |
Particle Size (< 7μm) | min. 85 | % Volume | — |
Regulatory & Compliance
- Certifications & Compliance
- Certification
INTERCURE®4 is needed when applications require F.D.A. approval.
Safety & Health
- Safety & Health
Contact may cause skin or eye irritation. Inhalation, ingestion, skin and eye contact should be avoided. Gloves, safety goggles, respirator masks and protective clothing should be worn when handling the powder. Local exhaust is recommended to remove dust. May form flammable dust-air mixtures. Avoid heat, sparks and open flames. Processing equipment should be well grounded.
Storage & Handling
- Storage Stability
Keep container tightly closed in a cool and dry place (23°C and 50% RH). After 24 months, retest before use.