company tower banner
Interflon Company Logo

Interflon Degreaser EM30+

Interflon Degreaser EM30+ is a powerful cleaner and degreaser Interflon Degreaser EM30+ with F-Active Technology is a very strong cold degreaser. This results in an excellent degreasing/cleaning effect. After cleaning the product evaporates without leaving residues behind. The evaporation rate is chosen so that the product has enough time to dissolve the dirt. Interflon Degreaser EM30+ is listed by the NSF for use in the food industry as degreaser, adhesive and glue remover.

Product Type: Adhesive Remover, Cleaner, Degreasers, Graffiti Remover, Ink Cleaner, Tar Cleaner

Application Area: Conveyor Chains, Engine, Floor, Machine Parts, Wall

Certifications & Compliance: FDA Compliant, Halal, NSF Approved

Features: Degreasing, Highly Versatile

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Composition
Mixture of solvents and additives
NSF Registration Number
128500.0
NSF
K1, K3

Features & Benefits

Ready-to-Use Product Features
Advantages
  • Good cleaning properties where there is excessive pollution
  • Long effectiveness by slow evaporation
  • Evaporates without leaving residues behind
  • Suitable for use in HACCP environments

Applications & Uses

Applications

Interflon Degreaser EM30+ is especially developed for cleaning parts that are strongly polluted by oil residues or grease, dirt, soil and paint residues, on parts such as chains, motors, machines, plating, slides, floors in workshops, etc.

Instructions For Use
  • Apply a thin layer of Interflon Degreaser EM30+ to the object that has to be cleaned. The best result is obtained by first applying Interflon Degreaser EM30+ for a few minutes before wiping away the dirt. For use in the food industry, all food products and packaging materials must be removed or covered before cleaning. After using, all surfaces must be washed with a detergent solution and rinsed with potable water.
  • It is advisable to test a small inconspicuous area to make sure that the cleaning agent does not adversely affect or damage the surface being cleaned. Do not apply to hot surfaces. When cleaning large vertical areas, apply the product from the bottom and work upwards ensuring that the whole area is covered. Cleaning away any dirt is best done from the top in a downwards direction to prevent leaving any streak marks. Do not use the product or allow to dry in direct sunlight.
  • Note: Interflon Degreaser EM30+ is a very strong cleaner which can affect elastomers and rubbers.

Properties

Physical Form
Odor
Characteristic
Typical Properties
ValueUnitsTest Method / Conditions
Density (20°C)0.82g/cm³
Dynamic Viscosity (20°C)Not determined
Highest Application Temperature30.0°C
Evaporation Speed (ether = 1)15.0
Vapour Pressure (20°C)Not determined

Regulatory & Compliance

Certifications & Compliance
Certifications
Halal,Kosher

Packaging & Availability

Packaging Type

Storage & Handling

Shelf Life
2 years
Storage

Storage temperatures should be less than 0°C need to be avoided to guarantee product quality.