Products

CHEM-KOTE 3 is a two component, 100% solids, epoxy system for use in contact with potable water. This product meets ASTM C-881.

CHEM-PRIME is a two component, solvent-free epoxy resin based primer. Both resin and hardener components are formulated to promote an excellent adhesion.

CEM310 is a ready-to-use, durable, non-metallic, flowable, high strength, cementitious and one component non-shrink grout. It complies to ASTM 1107-Type B. CEM310 comprises of a balanced blend of washed and graded silica sands, finely crushed Portland cement, flow improvement compounds and an inorganic shrinkage compensation additive, which densifies the grout.

CHEM-SEAL 14-WB is a high performance, water based, acrylic sealer and dust proofer with 14% solids content by weight. It is a milky white emulsion, which dries to form a clear semi-gloss to high-gloss film. CHEM-SEAL 14-WB is UV stable and weather resistant. It is designed to protect all indoor and outdoor concrete and masonry surfaces on residential, commercial and light industrial applications.

CHEM-POXY GROUT E999 is solvent-free 100% solids, moisture-insensitive three component, ultra-low creep, pumpable, high flow and non-shrink epoxy grout system. It is formulated to be highly flowable for clearances down to 13mm.

CHEM-FLOOR 45 is a two component, 100% solids, high modulus, glossy, heavy-duty, epoxy floor coating system. CHEM- FLOOR 45 exhibits excellent chemical resistant to various chemical reagents.

CHEM-HCR coating is a two-component, solvent free ep floor coating system that is high in chemical resistance. CHE HCR coating produces a dense tile like coating that will prot walls and floors. CHEM-HCR can be applied on both concr and steel surfaces.

CHEM-WET 2 is a two component, 100% solids, high modulus, medium viscosity, moisture insensitive epoxy system. This product meets ASTM C-881.

CHEM-SEAL 14 is a solvent based concrete sealer and dustproofer, 14% solid acrylic agent. Dries to a uniform bonded non-yellowing film. Can be used in interior or exterior applications. Especially effective on exposed aggregate concrete surfaces.

CHEM-FLOOR is a two-component, 100% solids, high modulus, high gloss, heavy duty, clear or pigmented epoxy floor coating system. CHEM-FLOOR system is used as a protective floor coating for concrete floors and as a high gloss seal coating for heavy-duty epoxy mortar screeds. The system is also used as a high gloss coating, non-slip aggregate flooring. It has an excellent abrasion and chemical resistance.

CHEM-FLOOR S is a two component, 100% solids, hi modulus, glossy, heavy-duty, epoxy floor coating syste CHEM-FLOOR S exhibits excellent chemical resistant to vari chemical reagents.

Chem-Seal 17 is a two component low viscosity, solvented-epoxy clear sealer and primer for concrete substrate.