Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Biodegradable
- Yes
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
• Avoid musculoskeletal and slippage related injuries • Increase production rates • Achieve closer fits • Reduce part rejects • Improve product performance • Reduce installation forces • Biodegradable • Non-flammable, non-toxic, non-corrosive
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Recommended Uses
P-80® Emulsion Temporary Rubber Assembly Lubricant is used to install hoses, tires, O-rings, seals, bushings, gaskets, grommets, grips, and many other rubber and plastic parts
- How To Apply
P-80® Emulsion IFC can be applied using automated systems or manually by dip, brush, sponge, or spray techniques
Properties
- Physical Form
- Appearance
- Milky white to beige
- Odor
- Mild
- Typical Properties
Value | Units | Test Method / Conditions | |
Description | Food-grade synthetic esters emulsified in water | — | — |
Viscosity (at 25°C) | 150.0 | cps | — |
pH Value | 8.7 | — | — |
Estimated dry time | min. 1 | hour | — |
Sprayable | Yes | — | — |
Reduction in friction | approx. 70 | % | — |
Freezing point | 0.0 | °C | — |
Flash point | None | — | — |
Storage temperature | 2˚ – 30˚ | °C | — |
Specific gravity | 0.98 | — | — |
Prop 65 | Exempt | — | — |
VOC by Volume | 1.0 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Environmental Compliance
"FDA 21 CFR 178.3570; NSF-Registered H1 lubricant; Complies with RoHS and REACH (SVHC: none). Cobalt-free; Conflict mineral-free"
Safety & Health
- Sewage Disposal
Contents may be disposed of according to local, state and federal regulations. Completely emptied packages can be recycled.
Packaging & Availability
- Packaging Type
- P-80® Emulsion Sizes Available
- "
- P-040T-100 - 10 mL tube (100 per case)
- P-0400-09 - 225 mL container (9 per case)
- P-0410-12 - 1 liter container (12 per case)
- P-0415 - 19.5 kg net wt.container
- P-0419 - 200 kg net wt.plastic drum. Spray tops available separately to fit 1-Liter and 225 mL bottles
Storage & Handling
- Handling
Before dispensing P-80® Emulsion IFC from drums, mix with a clean recirculation pump or folding propeller mixer for 5 minutes to ensure a homogenous mixture is drawn off. If a hold tank is used, agitate the lubricant before it is fed to assembly equipment. Smaller containers should be shaken or stirred prior to use. Never use air agitation. Bubbling compressed air through P-80® lubricants may cause separation or spoilage. Do not mix P-80® Emulsion IFC with other chemicals. Do not dilute with water. Store P-80® Emulsion IFC in a sealed container when not in use. Do not pour dispensed product back into the original container. Use at room temperature.
- Storage
Do not freeze. P-80® Emulsion IFC should be stored at temperatures between 2˚ – 30˚C (36˚ – 86˚F) in the original sealed container. Do not store outdoors in direct sunlight during warm weather. The shelf life of P-80® Emulsion IFC is 2 years from the manufacturing date.