company tower banner
Interprovincial Cooperative Limited Company Logo

IPCO® 2,4-D Amine 600

1 of 10 products in this brand
IPCO® 2,4-D Amine 600 is a post-emergent broadleaf herbicide in spring wheat, barley, rye, winter wheat, grass pastures, rangeland and turf. 2,4-D Amine 600 controls many of the mustards, stinkweed and Lambs’ Quarters as well as suppression of hard to kill weeds.

Functions: Herbicide

HRAC/WSSA Group: 4

Application Technique: Post-Emergence

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

HRAC/WSSA Group
Agrochemical Functions
Technologies
Active Ingredient
  • 2,4-D (Present as Dimethylamine Salt): 560 g a.e./L
  • Warning, contains the allergen soy.

Applications & Uses

Application Technique
Key Applications

Key Crops

  • Wheat (Spring, Winter)
  • Barley
  • Corn
  • Grass forage/pasture
  • Pre-seed/post-harvest/chem-fallow

Key Weeds

  • Volunteer canola
  • Redroot Pigweed
  • Kochia
  • Lambs’ Quarters
  • Ragweed (common, false, giant)
Mixing & Application Instructions
  • Fill tank l/2 full with water. Start agitation.
  • Add IPCO 2,4-D Amine 600 Liquid Herbicide.
  • When tank-mixes are used, consult the tank-mix product label for full mixing instructions.
  • Complete filling of tank.
  • Use 50-200 liters of water per hectare for ground application unless otherwise specified or on tank-mix product labels.
  • Do not exceed 275 kPa pressure for ground application

DO NOT apply this product directly to freshwater habitats such as lakes, rivers, sloughs, ponds, prairie potholes, creeks, marshes, streams, reservoirs and wetlands, estuaries or marine habitats. DO NOT contaminate irrigation/drinking water supplies or aquatic habitats by cleaning of equipment or disposal of wastes.

  • Field Sprayer Application: DO NOT apply during periods of dead calm. Avoid application of this product when winds are gusty. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) coarse classification. Boom height must be 60 cm or less above the crop or ground.
  • Aerial Application: DO NOT apply during periods of dead calm or when wind velocity and direction pose a risk of spray drift. Avoid application of this product when winds are gusty. DO NOT apply when wind speed is greater than 16 km/h at flying height at the site of application. DO NOT apply with spray droplets smaller than the American Society of Agricultural Engineers (ASAE) coarse classification. To reduce drift caused by turbulent wingtip vortices, the nozzle distribution along the spray boom length MUST NOT exceed 65% of the wing- or rotorspan.
  • Aerial Application (including fixed and rotary wing aircraft): Apply only by fixed-wing or rotary aircraft equipment which has been functionally and operationally calibrated for the atmospheric conditions of the area and the application rates and conditions of this label. Label rates, conditions and precautions are product specific. Read and understand the entire label before opening this product. Apply only at the rate recommended for aerial application on this label. Where no rate for aerial application appears for the specific use, this product cannot be applied by any type of aerial equipment. Ensure uniform application. To avoid streaked, uneven or overlapped application, use appropriate marking devices. No human flaggers are permitted.

Properties

Physical Form

Safety & Health

Precautions
  • Handling precautions: Keep out of reach of children. Avoid contact with eyes, skin and clothing. May cause skin irritation. Avoid inhaling vapors or mist. Protective Clothing and Equipment: Handling the concentrate (mixing and loading): Wear coveralls over a longsleeved shirt, long pants, chemical resistant gloves, socks and shoes. Rinse gloves before removal. Coveralls should be worn when pouring from containers. When handling more than 265 kg a.e. (473 L of IPCO 2,4-D Amine 600 Liquid Herbicide) per day, workers must also used a closed system. Handling the dilute spray solution (during application or repairing or cleaning equipment): Wear coveralls over a long-sleeved shirt, long pants, chemical resistant gloves, socks and shoes. For aerial application no human flaggers are permitted. Rinse gloves before removal. Gloves are not required during application when applicator is in an enclosed tractor or an enclosed airplane cockpit. Mixers/ loaders/ applicators using mechanically pressurized handgun must wear a respirator if they will be handling more than 5 kg a.e. (8.9 L) per day. Do not handle more than 8 kg. a. e. (14.3 L) per day. Operator use precautions: Wear freshly laundered clothing and clean protective equipment daily. Rinse gloves before removal. Wash hands before eating, drinking, using tobacco or using the toilet. If herbicide penetrates clothing remove immediately, then wash thoroughly and put on clean clothing. Throw away clothing and other absorbent materials that have been drenched or heavily contaminated with this product’s concentrate. After using this product, remove clothing and launder separately and promptly, and thoroughly wash hands and exposed skin with soap and water. Follow manufacturer’s instructions for cleaning personal protective clothing and equipment. If no such instructions for washables are provided, use detergent and hot water. Keep and wash personal protective equipment separate from household laundry. After work, remove all clothing and shower using soap and water.
  • General Precautions: Handle with care and mix only in a closed container. Use only in a well ventilated area. Avoid contamination of foods. Keep in original container during storage. Do not re-use container unless otherwise specified. Store the container tightly closed away from seeds, fertilizers, plants and foodstuffs. Store above 0 Deg. C. SHAKE WELL BEFORE USING. Clean spray equipment thoroughly after use. Transfer System: For containers larger than 20 L, use a transfer system that avoids open pouring when transferring the liquid concentrate from such containers into the spray tank. Re-Entry Interval: Do not enter treated areas within 12-hours after application.
First Aid
  • In case of poisoning, call a physician or poison control center IMMEDIATELY.
  • If on skin or clothing, take off contaminated clothing. Rinse skin IMMEDIATELY with plenty of water for 15–20 minutes. Call a poison control center or doctor for treatment advice.
  • If in eyes, hold eye open and rinse slowly and gently with water for 15–20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
  • If swallowed, call a poison control center or doctor IMMEDIATELY for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
  • If inhaled, move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison control center or doctor for further treatment advice.
  • Take container, label or product name and Pest Control Product Registration Number with you when seeking medical attention.

Packaging & Availability

Availability

10 liters.

Storage & Handling

Rinsing And Disposal Information

For Recyclable Containers: Do not reuse this container for any purpose. This is a recyclable container, and is to be disposed of at a container collection site. Contact your local distributor/dealer or municipality for the location of the nearest collection site. Before taking the container to the collection site:

  1. Triple- or pressure-rinse the empty container. Add the rinsings to the spray mixture in the tank.
  2. Make the empty, rinsed container unsuitable for further use. If there is no container collection site in your area, dispose of the container in accordance with provincial requirements.
  • For Returnable Containers: Do not reuse this container for any purpose. For disposal, this empty container may be returned to the point of purchase (distributor/dealer).
  • For Returnable/Refillable Containers: For disposal, this container may be returned to the point of purchase (distributor/dealer). It must be refilled by the distributor/dealer with the same product. Do not reuse this container for any other purpose. For information on disposal of unused, unwanted product, contact the manufacturer or the provincial regulatory agency. Contact the manufacturer and the provincial regulatory agency in case of a spill, and for clean up of spills.