Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
IntraCrop Company Logo

IntraCrop Inferno

Inferno improves the deposition and retention of spray droplets, and is an effective pH buffer, water conditioner and anti-foam. Inferno significantly reduces the number of spray droplets under 100 microns, reducing spray drift by up to 75%. Additional studies demonstrated less glyphosate drift at 70cm with Inferno compared with glyphosate alone at 50cm (Source: Silsoe trials 2019), improving product performance and environmental profile. Inferno softens hard water by effective and rapid sequestration of Ca2+ and Mg2+. These hard water cations are bound and rendered unavailable in a soluble form.

Functions: Buffers & pH Stabilizer, Defoamer, Drift Control Agent, Water Conditioner

Application Technique: Sprayers

Labeling Claims: Non-Flammable

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Agrochemical Functions

Buffers & pH Stabilizer,

Defoamer,

Drift Control Agent,

Water Conditioner

Technologies

Agrochemicals

Product Families

Agrochemicals — Adjuvants & Formulation Ingredients

Defoamers,

Drift Control, Foam Markers & Thickeners,

Water Conditioners & Softeners

Agrochemicals — Plant Health, Nutrients & Soil Management

pH Control

Contains

Blend of drift reducing polymers, pH buffers, water conditioners, anti-foam and humectants.

Features & Benefits

Labeling Claims

Non-Flammable

Benefits
  • Reduces spray drift
  • Water conditioner and buffers the pH of spray water to optimum (pH6)
  • Increases spray deposition
  • Droplets do not coalesce and roll off leaf surface, increasing spray retention
  • Contains an effective anti-foam to ease sprayer filling and reduce risk of contamination.

Applications & Uses

Markets

Agriculture & Feed

Applications

Agriculture & Feed — Agricultural Crops

Other Agricultural Crops

Application Technique

Sprayers

Crop Suitability

Wide range of crops/situations to improve herbicide efficacy.

Dose Rate

0.5% – 1% (0.5 – 1.0 liter per 100 liters spray volume)

Agronomic Guidelines
  • Always add to spray tank FIRST
  • Compatible with all glyphosate formulations, phenoxy herbicides.

Properties

Physical Form

Liquid

Technical Details & Test Data

Eurofins 2018 Trial: Blackgrass control

The addition of Inferno at 0.5% (0.5 liters / 100 liters spray volume) significantly increased the level of blackgrass control, the higher rate 1% (1.0 liter / 100 liters spray gave a further significant improvement in control (p≤0.05).

IntraCrop Inferno - Eurofins 2018 Trial: Blackgrass Control

 

Test Data

Effective Drift Reduction

Independent studies conducted by Silsoe Spray Applications Unit have demonstrated that the inclusion of 1% Inferno can reduce the amount of spray drift by up to 75% (see Figure 1). This achieved by using polyacrylamide polymers that reduce the number of fine spray droplets (<100 microns) that are most prone to drift, from 19.49% to 9.49% resulting increasing the Volume Median Diameter (VMD), see Table 1 below.

Glyphosate alone

IntraCrop Inferno - Test Data

Glyphosate + Inferno

IntraCrop Inferno - Test Data - 1

Figure 1: Silsoe Spray Applications Unit: Drift reduction test: FF11003

IntraCrop Inferno - Test Data - 2

 

Nozzle : Teejet 110 03 flat fan 3.0 bar
Forward speed of 8 km/h and a wind speed of 2 m/s

Table 1 Flow rate, l/min VMD (μm)

% vol < 100.0 μm
1 Water 1.186 192.86 14.18
2 MOTIF 4% 1.192 167.55 19.47
4 MOTIF 4% + Inferno 1% 1.193 338.98 9.49

Packaging & Availability

Packaging Type

Totes (IBC)

Pack Size

5 liter, 1000 liter IBC