Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Base
- Silyl-Terminated Polymer
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Characteristics
- Excellent adhesion on porous and non porous substrates
- High performance mechanical properties
- Permanent elastic after full cure
- Self leveling
- No bubble formation within sealant even in high temperature and humidity applications
- Very easy to tool and finish
- Color stable and uv resistant
- Ecological advantages - free of isocyanates, solvents, halogens and acids
- Minimal health and safety considerations
- Can be painted with all water based paints and many other systems (to be tested)
- Good extrudability even at low temperatures
- Excellent weather resistance in all climates
- Primerless adhesion on many different substrates (except where water pressure may occur)
- Almost odorless
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Applications
- Sealing of joints in building and metal work industry.
- Sealing of overlap joints between panels in automotive applications.
- Substrates
- Surface Preparation - clean, dry, free of dust and grease, free of chipping paint, no adhesion on PE, PP, PTFE and bituminous substrates.
- Priming - Porous surfaces in water loaded applications should be primed with primer 150.
- Surface activator may be used to pretreat non-porous surfaces.
- Resistance to Chemical Agents
Good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis. Poor resistance to aromatic solvents, concentrated acids, chlorinated hydrocarbons.
- Limitations
- May be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase.
- Can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc. may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests.
- Should not be used as a glazing sealant.
- Should not be used for continuous immersion in water.
- Do not apply to freshly treated wood; treated wood must have been weathered for at least 6 months.
- Lower temperatures and humidity will extend curing time.
- Product Application
- Method - Manual- or pneumatic caulking gun.
- Application temperature - 34°F - 90°F.
- Cleaning - with IPA immediately after use and before curing.
- Repair - With SoudaSeal SL
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Sag | Self-Leveling | — | — |
Curing System | Moisture Cure | — | — |
Tack-Free Time (Maximum 72 hours) | 45.0 | minutes | ASTM C 679 |
Cure Time (¼” Diameter Bead, 75ºF, 50% Relative Humidity) | 24 - 72 | hrs | — |
Hardness | 27 - 33 | Shore A | ASTM C 661 |
Skin Formation (75ºF, 50% Relative Humidity) | 10.0 | minutes | — |
Service Temperature Range | -40 to 194 | °F | — |
Shear Strength | 150.0 | psi | ASTM D D 1002 |
Elongation | 650.0 | % | ASTM D 412 |
Stain and Color Change | Passes, No Visible Stain | — | ASTM C 510 |
Artificial Weathering (2000 hrs Xenonarc) | No Cracking | — | ASTM C 793 |
Regulatory & Compliance
- Regulatory & Compliance
- ASTM C 920, Type S, Grade P, Class 25, Use T, NT, M, A, G and O
- Federal Specification TT-S-00230C, Type II, Class A
Technical Details & Test Data
- Joint Dimensions
- Minimal Width: 1/16”
- Maximum Width: 1 1/2”
- Minimum Depth: 1/5”
- Recommendation: width = 2 x depth
Safety & Health
- Health and Safety Recommendation
- Keep out of reach of children.
- Avoid skin and eye contact.
- On Contact, uncured sealant could cause irritation to skin and eyes.
- In case of eye contact, flush eyes with warm water for 15 minutes, call a physician.
- For skin contact, remove sealant with a paper towel.
- If swallowed, do not induce vomiting, call a physician.
- SoudaSeal SL is manufactured for professional use only.
Packaging & Availability
- Packaging Type
- Packaging
- 20 fl.oz sausages
- 29 fl.oz pro pack
Storage & Handling
- Shelf Life
12 months in unopened packaging in a cool and dry storage place at temperatures between 41°F and 77°F.