Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characteristics
- Thickness range from 2mm to 80mm
- Wide range of colors and tints
- U.V resistant
- High chemical resistance
- Low water absorbsion
- Fully recyclable
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
- Signage
- Point of Sale
- Display
- Fabrication
- Glazing
- Lighting
- Shopfitting
- Splash Backs
Properties
- Physical Form
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
- Optical Properties
- Acoustic Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength | min. 70 | Mpa | UNE-EN ISO 527-2/1B/5 |
| Modulus of Elasticity in Traction | min. 3000 | Mpa | UNE-EN ISO 527-2/1B/5 |
| Deformation in Traction | min. 4 | % | UNE-EN ISO 527-2/1B/5 |
| Flexural Strength | 110.0 | Mpa | UNE-EN ISO 178 |
| Resistance to Charpy Impact (Test Piece Not Notched) | min. 13 | kJ/m2 | ISO 179/1 Fu |
| Rockwell Hardness | 100.0 | Escala M | UNE-EN ISO 2039-2 |
| Friction Coefficient (PMMA / PMMA) | 0.8 | ºC | IRPEN |
| Friction Coefficient (PMMA / Steel) | 0,48 - 0,55 | ºC | IRPEN |
| Value | Units | Test Method / Conditions | |
| Density | 1.19 | g/cm3 | ISO 1182, Method A,C o D |
| Water Absorption (24h, 23ºC) | 0,50^(2) | % | UNE-EN ISO 62, Method 1 |
| Calorific Power (760Mm and 0°C) | 1.255 | kJ/Kg, ºC | — |
| Lgnition Temperature Ti | 300.0 | ºC | ASTM-1929 |
| Self-Ignition Temperature TAI | 430.0 | ºC | ASTM-1929 |
| Reaction To Fire By Radiation | M4 | — | UNE-23-727 |
| Value | Units | Test Method / Conditions | |
| Specific Heat | 0.35 | cal/g, ºC | — |
| Heat Conductivity | 4,5 x 10^-4 | cal cm/cm^2 seg, ºC | DIN52612 |
| Heat Transmission Coefficient (3mm) | 5.5 | kcal/m^2 h, ºC | — |
| Softening Temperature Vicat | 118.0 | ºC | UNE-EN ISO 306 Method A50 |
| Temperature For Buckling Under Load | 98.0 | ºC | UNE-EN ISO 75/2-A |
| Recommended Moulding Temperature | 150 - 170 | ºC | — |
| Maximum Service Temperature | 80 - 85 | ºC | IRPEN |
| Moulded Part | 75 - 80 | — | — |
| Linear Dilation Coefficient | 7 x 10^-5 | K^-1 | ISO 11359-2 |
| Dimensional Variations At High Temperature (Contraction) | max. 2,5 | % | UNE-EN ISO 7823-1 Schedule A |
| Value | Units | Test Method / Conditions | |
| Specific Transversal Resistance | Mi. 10^15 | Ω Cm | DIN VDE 0303 P3 |
| Dielectric Strength Ed (1 mm test piece) | 30.0 | kV/mm | DIN VDE 0303 P2 |
| Dielectric Constant (50 Hz) | 3.5 | — | DIN VDE 0302 P4 |
| Dielectric Constant (50 Hz) | 5x10 ^-2 | — | DIN VDE 0303 P4 |
| Dielectric Constant (10^6 Hz) | 2.6 | — | DIN VDE 0302 P4 |
| Dielectric Constant (10^6 Hz) | 5x10 ^-2 | — | DIN VDE 0303 P4 |
| Value | Units | Test Method / Conditions | |
| Light Transmission (420mm^(3), Before exposure to a xenon lamp) | min. 90 | % | ISO 13468-2 |
| Light Transmission (420mm^(3), After exposure to a xenon lamp during (1OOOh)) | min. 88 | % | ISO 13468-2 |
| Turbidity | 1.0 | % | ISO 14782 |
| Refractive Index | 1.49 | — | UNE-EN ISO Method A |
| Value | Units | Test Method / Conditions | |
| Sound Proofing (4mm) | 24.0 | dB | DIN 52210 |
| Sound Proofing (6mm) | 27.0 | dB | DIN 52210 |
| Sound Proofing (10mm) | 29.0 | dB | DIN 52210 |
| Sound Proofing (20mm) | 32.0 | dB | DIN 52210 |
Regulatory & Compliance
- Certifications & Compliance