Products

ISO TECH Kunststoff GmbH ISO-PP is often used in chemical plants. The semi-crystalline thermoplastic is also characterized by very low moisture absorption.

ISO TECH Kunststoff GmbH ISO-PVDF is a thermoplastic material with good mechanical properties. Due to its high chemical resistance, our customers in the chemical and pharmaceutical industries in particular use this material, especially in systems with high mechanical loads.

ISO TECH Kunststoff GmbH ISO-PTFE - colloquially known as Teflon - offers very high chemical and thermal resistance. In combination with its extremely low surface tension, ISO-PTFE is a very suitable material for different, challenging applications in the chemical, pharmaceutical and food industries.

ISO-LEN® 500 also known as PE-HMW or Polyethylene 500, is made from high-molecular raw materials in a sinter-press process. The material is used in a wide variety of shapes and colors in various industries. In addition to good sliding properties, the good abrasion resistance is particularly valued.

ISO TECH Kunststoff GmbH ISO-POM is a semi-crystalline, thermoplastic plastic that is characterized by high strength and hardness as well as high abrasion resistance. In particular, slide rails and bearing bushings are often made from ISO-POM .

ISO TECH Kunststoff GmbH ISO-PET is a thermoplastic material that impresses with its hardness and pronounced sliding behavior. Applies ISO-PET , for example in the food industry for guided tours, rolling or stops and mechanical engineering as a raw material for gears or slide elements.

ISO TECH Kunststoff GmbH ISO-PEEK is a semi-crystalline, thermoplastic high-performance plastic which, in addition to very good mechanical properties, has high sliding properties. In addition, the material has a high temperature resistance. ISO-PEEK is often used for sliding guides and seals.

ISO-LEN® 1000 also known as PE-UHMW or Polyethylene 1000, has proven itself for many years in various fields of application. Due to the wide range of properties, products made from this all-round material are used in all areas of technology in which particularly high demands are made on the materials used. By adding additives, we can also supply you with finished parts made of PE-UHMW in an antistatic version ( ISO-LEN® 1000 AST ) or electrically conductive form ( ISO-LEN® 1000 EL ).

ISO-LEN® HOT is an ultra-high molecular weight low-pressure polyethylene based on the well-known ISO-LEN® 1000. The addition of oxidation-inhibiting additives enables a longer service life at higher temperatures.