Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Technology
Fluoropolymer urethane
- Coating Type
Two-component fluoropolymer urethane
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Outstanding Features
- Provides exceptional weather resistance.
- Protects colors from fading. Keeps white bright.
- Maintains surface texture, gloss and appearance.
- Resists dirt retention, staining and discoloration.
- High abrasion and damage resistance. Low friction.
- Excellent mechanical strength, toughness and flexibility.
- Surface resists fungal growth and microbiological deterioration.
- High electrical resistivity protects metallics from tarnishing.
- Low VOCs and low odor during application.
- Will not attract insects, rodents or reptiles.
- Extends the useful lifespan of protective coatings.
Applications & Uses
- Compatible Substrates & Surfaces
- Usage
Recommended application over areas of ponding water or suspected ponding water. Can be used over custom colors to preserve appearance and prevent chalking or fading. May also be used over many types of skylights to preserve and protect their appearance and function.
- Coverage
Approximately 350-400 square feet per gallon (depending upon substrate)
- Application
IsoClear Hardener container should be emptied into the IsoClear Resin and stirred for 3 minutes. After stirring, allow to sit for 10 minutes or as long as necessary for all the air to escape.
IsoClear may be applied over AcryLinkG acrylic roof coating after it has been thoroughly dry for at least 24 hours. If coating over another painted surface, check compatibility first, as some paints may bleed color. IsoClear may be applied by brush or airless spray technique in a thin, even coat. Care should be taken to avoid creating foam or trapping air bubbles which may later result in pinholes or hazing. If traction enhancement is required, iron-free sharp white quartz sand may be broadcast into the wet IsoClear. After the first coat has thoroughly dried with the embedded grit, a second coat of IsoClear is applied to thoroughly encapsulate the aggregate. Equipment may be cleaned with water while the IsoClear is still wet.
- Limitations
Do not use below 40°F. Do not apply if the application cannot be protected from precipitation for 4 hours.
- Coverage
Approx. 350-400 ft2/gal
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Cure Time (70°F, 50% RH) | 24.0 | Hours | - |
| Drying Time (70°F, 50% RH) | 1.0 | Hour | - |
| Elongation | 50.0 | % | ASTM D 412 |
| Flashpoint (FTMS141A/M4293) | Non-Flammable | - | - |
| Hardness | 4H | - | ASTM D-3363 |
| Impact Resistance (4mm Indent) | No cracking or loss of adhesion | - | - |
| Low Temperature Flexibility (20°F) | 180° Bend | - | ASTM C-711 |
| Recommended Thickness (DFT) | 2 - 3 | mils | - |
| Solids (Volume) | 45.0 | % | ASTM D-1044 |
| Solids (Weight) | 48.0 | % | ASTM D-1044 |
| Tensile Strength | 2000.0 | psi | ASTM D-412 |
| VOC | 80.0 | g/liter | - |
| Water Absorption | 0 | ASTM D-570-77 | |
| Weatherometer | Pass | - | ASTM G-23 |
Packaging & Availability
- Packaging
- 1 Gallon
Storage & Handling
- Pot Life
- 6.0
- Shelf Life
- 1 Year
- Shelf Life
Shelf life is 12 months when stored in proprietary containers between 45°F and 95°F.
- Maintenance
Damaged areas should be thoroughly sanded, cleaned and then recoated. Dirt accumulations may be removed with warm water and detergent.