Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Objectives
- Good mechanical characteristics
- Good resistance to UV rays
- Good water resistance
- Excellent application characteristics
Applications & Uses
- Applications
- Application Method
- Applications
- Boating for small boats
- Transport
- Furniture
- Nautical
- Sanitary
- Application Features
- For the application it is recommended to check the temperature of the product, of the molds and the environment, which must be between 18°C and 25°C.
- The product it is supplied already accelerated and must be catalyzed with traditional MEKP in reason of 1.5% - 2%.
- The thickness of the wet gel coat film must be, depending on the conda of the mold and the application method, approximately 0.4 - 0.5 mm, which is equivalent to a quantity of product between about 600 and 800 gr / m2.
- In the case of “airless” or similar systems, we recommend correct setup of the system (nozzle and pressure).
- If due to its application it should be further dilution required, the type and amount of diluent may vary depending on according to the specific needs of the customer.
- In any case, our technicians are available to available for precise indications in this regard.
Properties
- Color
- Appearance
- Transparent
- Physico-Chemical Properties
Value | Units | Test Method / Conditions | |
Residue Solid | 55 - 59 | % | C 08 |
Specific Weight | 1 - 1.2 | g/cm³ | DIN 63217 |
Hardness | min. 40 | Barcol | ASTM D 2583 |
Gel Time | 10 - 14 | minutes | P04 (Internal Italbeit Method) |
Peak | 190 - 210 | °C | P04 (Internal Italbeit Method) |
Increase (35°C) | min. 15 | °C/min | P04 (Internal Italbeit Method) |
Viscosity (2 rpm) | 20000 - 30000 | mPa.s | ASTM D2196 |
Viscosity (20 rpm) | 3000 - 5000 | mPa.s | ASTM D2196 |
Thix Index | min. 6 | — | ASTM D2196 |
Safety & Health
- Warnings
- Flammable product
- Keep away from open flames, sparks and sources of heat.
- Do not smoke, do not drink, do not eat during use.
- Avoid the accumulation of electro-static.
- Use in well-ventilated areas.
Packaging & Availability
- Available Versions
- Spray
- Roller / veil
- Brush
- Self-releasing
- Paraffinized
- Pigmented
- Quick gel time
- Transparent
- Packaging
- 25 kg drums
- 250 kg drums
- IBC 1000 kg
Storage & Handling
- Stability
- 3 months if stored in containers original closed, between 16°C and 22°C, away from open flames, sources of heat, not exposed to light.