Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Properties
We recommend the METAL RAPID 7080 series for standard applications with the following properties:
- Good ink / water balance
- High gloss
- Low dot gain
- Good transfer and printing consistency
- High mechanical resistance.
- Wide latitude of fount solution tolerance
Applications & Uses
- Markets
- Application Method
- Substrates
The METAL RAPID 7080 ink series is suitable for both uncoated and coated with specifically suitable enamel and/or clear size for:
- Tinplate
- Steel
- TFS
- In case peculiar substrates or specific adhesion performance are required, we recommend that proper and specific tests were carried out before the printing run.
- Applications
Considering the good mechanical resistance of the dried ink layers, in-line varnishing for protection is not required, even if possible, however we recommend to use suitable specific
coatings in order to provide effective protection for the printed substrates for these applications:- Crimped and welded seam 3-piece bodies
- DRD and DWI cans and lids (canned tuna, canned meat, etc.)
- Round bodied cans
- Aerosols
- Shallow draw cans and lids
- Food Can Ends
- Caps and Closures (Crown Cork, Twist- Off closures,Pilfer-proof, etc.)
- Drying Conditions
The METAL RAPID 7080 inks are suitable for different drying conditions and thermal oven lines. Suggested standard conditions of drying, considering a normally applied layer of inks are: Temperature: 160-180 °C Time: 8-10 minutes In case small adjustments are needed for special requirements, please find the recommended additives and technical information on the table below.
Properties
- Color
- Properties
Color Gamut and Fastness Properties
Light Fastness Alcohol Solvent Alkali Tint medium White 150 1TR-7080-0150 NA NA NA
Heat FastnessHeat Fastness (Highbake 3 x10 mins – 410°F 210°C) Heat Fastness (600°F/ 315°C - 6 seconds Full Tone 20:1 REDN Full Tone 20:1 REDN Tint medium White 150 1TR-7080-0150 NA NA NA NA
Process ResistanceTest conditions :20lbs/264°F/1hr ++ 9kg/130°C/1hr Full Tone 20:1 REDN 50:1 REDN Tint medium White 150 1TR-7080-0150 NA NA NA METAL RAPID 7080 Press room Auxiliarie
Usage Dosage Thinner/Diluent 9AD-7080-0000 Suggested usage to reduce tack and viscosity of the inks during printing run Up to 5 % Anti-tack Paste 9AD-7080-0002 Suggested usage to reduce the ink’s tack Up to 5 % Catalyst 9AD-7080-0003 Suggested usage to enhance drying speed Up to 3%
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Packaging & Availability
- Packaging Type
- Packaging
2.5 kg metal cans
- Food Packaging
The products listed are not suitable for printing internal side of the packaging (box or closures).
Storage & Handling
- Shelf Life
24 months from the production date if the container is not opened. Store between 5 - 35°C. Higher storage temperature may reduce shelf life.