Resiten® LE (0.062 in Thick)

Identification & Functionality

Chemical Family

Phenols & Phenolics

Polymer Name

Phenolic Compound

Reinforcement Material

Cotton

Composite Materials Functions

Laminate

Technologies

Composite Materials

Product Families

Composite Materials — Prepregs & Molding Compounds

Laminates

Applications & Uses

Markets

Electrical & Electronics

Applications

Electrical & Electronics — Devices & Assemblies

Other Devices & Assemblies

Electrical & Electronics — Other Electrical & Electronics Applications

Properties

Physical Form

Sheets

Typical Properties

	Value	Units	Test Method / Conditions
Thickness	0.062	inches	—
Tensile Strength (Lengthwise)	14100	psi	ASTMD638
Tensile Strength (Crosswise)	10400	psi	ASTMD638
Flexural Strength (Condition A, Lengthwise)	23000	psi	ASTMD790
Flexural Strength (Condition A Crosswise)	17100	psi	ASTMD790
Flexural Strength (D48/50, Lengthwise)	26500	psi	ASTMD790
Flexural Strength (D48/50, Crosswise)	20400	psi	ASTMD790
Compressive Strength (Lengthwise)	8400	psi	ASTMD695
Compressive Strength (Crosswise)	7200	psi	ASTMD695
Notched Izod Impact (Condition A Lengthwise)	1.3	ft.lb./in.	ASTMD256
Notched Izod Impact (Condition A Crosswise)	0.9	ft.lb./in.	ASTMD256
Notched Izod Impact (D48/50 Lengthwise)	1.3	ft.lb./in.	ASTMD256
Notched Izod Impact (D48/50 Crosswise)	0.7	ft.lb./in.	ASTMD256
Notched Izod Impact (E48/50 Lengthwise)	1.3	ft.lb./in.	ASTMD256
Notched Izod Impact (E48/50 Crosswise)	0.7	ft.lb./in.	ASTMD256
Water Absorption (of weight)	1.4	%	ASTMD256
Specific Gravity	1.34	—	ASTMD570
U.L. Subject 94	HB	VO	ASTMUL94
Dielectric Strength	318	Vpm	ASTMD149
Dielectric Breakdown (Condition A)	min. 80	kV	ASTMD149
Dielectric Breakdown (D48/50)	39	kV	ASTMD149
Arc Resistance (Condition A)	131	seconds	ASTMD495
Arc Resistance (D48/50)	107	seconds	ASTMD495
U.L HV Track Rate at .057"	17.2	mm/Min.	ASTMD150
Permittivity (1MHz, Condition A)	5.06	—	ASTMD150
Permittivity (1MHz, D24/23)	5.33	—	ASTMD150
Dissipation Factor, 1MHz (Condition A)	0.039	—	ASTMD150
Dissipation Factor, 1MHz (D24/23)	0.043	—	ASTMD150
Permittivity, 1KHz (Condition A)	6.08	—	ASTMD150
Permittivity, 1KHz (D24/23)	6.85	—	ASTMD150
Dissipation Factor, 1KHz (Condition A)	0.08	—	ASTMD150
Dissipation Factor, 1KHz (D24/23)	0.145	—	ASTMD150
U.L. Hot Wire Ignition at .057"	9	—	U.L. 746A
U.L. High Amp Ignition at .057"	6	Exposure	U.L. 746A
Thermal Coefficient of Expansion	2.0 x 10E-5	cm/cm/ °C	—
U.L. temperature Index at .057" (Electrical)	115	°C	—
U.L. temperature Index at .057" (Mechanical)	125	°C	—