Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- 100% Water Soluble when used on watermain installation
- Will not transfer taste and odor when used on potable watermains
- Blue Lube has no odor
- Non-reactive to chlorinated water
- Remains a paste at temperatures above 150°F
- Will not break down if repeatedly frozen and thawed
- Brushable to 7°F
- Easy Cleanup
- Emulsified product
- Benefits
- Blue Lube will flush out of the system without having to repeatedly flush the line, saving both time and water
- Does not cause a "greasy" taste in the water like many oleate-based lubricants resulting in fewer customer complaints
- Oleate-based lubricants will oxidize when exposed to the environment and release foul odors. Blue Lube will not leave the end user smelling like grease
- Oleate lubricants will react with chlorine to produce aldehydes, increasing the taste and odor problems
- Will not become runny at higher temperatures resulting in loss of product
- Blue Lube can be reused if ever frozen
- Blue Lube can be used in the cold. Cold weather makes oleate-based lubricants harder to flush out of the system
- Will not stain hands or clothes. Cleans up with water or dry towel
- Blue Lube can be used on wet pipe
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Recommended Uses
A blue viscous gasket lubricant for lubricating all rubber and plastic gaskets used in mechanical pipe coupling including Gruvlok* and Victaulic** type fittings. BLUE LUBE insures proper alignment of gaskets for correct fit during pipe installation. It works well on wet or dry surfaces and is nontoxic and suitable for use on potable water systems. BLUE LUBE is odorless and cleans up easily. Safe for use on all metal, plastic and rubber gasketed pipe.
- Direction for Use
- Clean bell of pipe. Remove any loose dirt, gravel, rust, scale, or foreign material. Remove standing water for best results
- Clean spigot of pipe as in Step 1. Surfaces must be thoroughly clean before application of “Blue Lube”
- Apply “Blue Lube” liberally to the bell of pipe. For best results use a cotton swab applicator
- Apply “Blue Lube” liberally to the spigot of pipe. Keep the lubricated surfaces free from dirt
- Immediately after application of the lubricant, assemble the joint. Apply even pressure and insert the spigot into the bell.
Properties
- Typical Properties
- Typical Properties
Drying Time: Drying time of the lubricant will vary with weather conditions; therefore, it is important to join the pipe and gasket as soon as possible after applying the lubricant. If drying should occur before joining the pipe with the gasket, re-swab the pipe and gasket immediately. For best results, apply with a cotton swab applicator.
Corrosiveness: Non-corrosive.
Flammability: Nonflammable
| Value | Units | Test Method / Conditions | |
| Temperature Range | -14 to 66 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Environmental Statement
- BLUE LUBE is nontoxic and will not transfer taste or odor to water in a pipe that has been flushed in accordance with AWWA C 651
- BLUE LUBE is suitable for use in potable water systems and will not promote bacterial growth. This lubricant is safe for use on water or sewer gaskets and pipe related materials.
- Meets ASTM D 3139 Section 4.2
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging
Blue Lube is available in pints, quarts, gallons, 5 gallon, and 55 gallon drums.