Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Outstanding high temperature bearing performance
- Superior quality
- Highly water resistant
- Cost-effective because of versatility
- Provides superior rust and corrosion protection
- Excellent cold temperature flow
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Recommended Uses
E-Z TURN Faucet and Valve Heat Proof Grease can be used for lubricating valve stems of faucets, valves, ballcocks, plungers, packings, washers, disk brakes and wheel bearings, ball joints, u-joints, chassis, bearing, couplers, and many other automotive, industrial and commercial applications. This grease is ideally suited for wheel bearings for both conventional breaks as well as disk brakes, where the heat would cause conventional lithium greases to melt and run out. It can be used on potable water since it is safe and nontoxic.
- Direction for Use
VALVE BODIES:
- Unscrew valve bonnet nut.
- Rotate valve stem counter clockwise to remove the valve body
- Clean stem and threads if necessary
- Apply a liberal amount of E-Z TURN to the stem and stem threads
- Reassemble in reverse order. Tighten bonnet nut lightly. Retighten if there is seepage when system pressure is restored
BALLCOCK AND FLOAT LINKAGES:
- Clean and descale if necessary
- Apply liberal amounts of E-Z TURN to all rubbing and pivoting surfaces
- Apply a thin film of E-Z TURN to all metal parts in contact with water to prevent corrosion and scale build up
- Apply E-Z TURN to float linkage threads to prevent corrosion
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Temperature Range | -29 to 190 | °C | — |
| Flash Point | 232.0 | °C | — |
| Melting Temperature | 176.0 | °C | — |
| NLGI Service Classification | GC - LB | — | — |
| NLGI Grade | 2.0 | — | — |
| Thickener Type | Lithium Complex | — | — |
| Worked Penetration (60 Strokes) | 265 - 295 | — | ASTM D217 |
| Roll Stability (% Penetration Change) | 8.0 | — | ASTM D1831 |
| Dropping Point | 260.0 | °C | ASTM D2265 |
| Rust Test | Pass | — | ASTM D1743 |
| Water Washout (175°F, % Loss) | max. 7 | % | ASTM D1264 |
| Oxidation Stability (100 hrs.) | 5.0 | psi | ASTM D942 |
| Wheel Bearing Leakage | 1.4 | g | ASTM D4290 |
| Oil Separation (% Loss) | 3.5 | % | ASTM D1742 |
| Timken OK Load Waer | 441.0 | Newtons | ASTM D2509 |
| Four Ball EP Test Weld Load | 250.0 | Kg | ASTM D2596 |
| Load Wear Index | 45.0 | — | ASTM D2596 |
| Wheel Bearing Life Test | 100.0 | h | ASTM D3527 |
| Low Temperature Torque (-40°C) | 13.0 | Nm | ASTM D3527 |
| Base Oil Viscosity (40°C) | 140 - 180 | cST | ASTM D445 |
| Base Oil Viscosity (100°C) | 13.5 - 16.5 | cST | ASTM D445 |
| RoHS | Compliant | — | — |
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging
Available in plastic containers
- 2 oz. (56.7 g)
- 5 lbs. (2.3 kg)