Knowde Enhanced TDS
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Collected Volatile Condensable Materials (CVCM) | 0.9 | % | — |
Compressive Strength | 150 | psi | — |
Dielectric Constant 9375 | 1.12 | MHz | — |
K-Factor | 0.28 | BTU in/hr ft F.. | ASTM D-256 |
Maximum operating temperature | 250 | °F | — |
Modulus of Elasticity | 5600 | psi | — |
Modulus of Rigidity | 2000 | psi | — |
Molded Density | 6 | pcf | — |
Outgassing Data Total mass Loss (TML) | 2 | % | — |
Shear Strength | 130 | psi | — |
Stress at 2% Strain | 110 | psi | — |
Tensile Strength | 190 | psi | — |
Technical Details & Test Data
- Processing Parameters
Blend T component into R component. Mix for about two minutes. Pour at decrease of viscosity and perception of exothermic heat. When foaming action has ceased, postcure immediately. Average cure is about two hours at 200°F. Cool part to 110-130°F before stripping from mold.
Storage & Handling
- Storage
Avoid moisture contamination during storage, handling, and processing. Store the polyol and isocyanate components from 65°F to 85°F. Do not expose isocyanate component to lower temperatures as freezing may occur
- Shelf Life
The shelf life is 12 months if stored in original unopened containers