Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Composite Materials Functions
- Technologies
- Product Families
Applications & Uses
- Markets
- Composites End Use
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Compressive Modulus Parallel | 1790 | psi | ASTM D-1621 |
| Compressive Modulus Perpendicular | 1780 | psi | ASTM D-1621 |
| Density (Core) | 4.6 | pcf | ASTM D-1622 |
| Compressive Strength 10% deflection Parallel | 77.5 | psi | ASTM D-1621 |
| Compressive Strength 10% deflection Perpendicular | 80.5 | psi | ASTM D-1621 |
| DensityMolded overall | 5 | pcf | ASTM D-1622 |
| Hand Mix Reactivity(25°C) Cream Time | 24 | seconds | — |
| Hand Mix Reactivity(25°C) Cup density #10 cup | 3 | pcf | — |
| Hand Mix Reactivity(25°C) Tack Free Time | 70 | seconds | — |
| Shear Modulus Parallel | 970 | psi | ASTM C-273 |
| Shear Modulus Perpendicular | 820 | psi | ASTM C-273 |
| Shear Strength Perpendicular | 32.9 | psi | ASTM C-273 |
| Shear StrengthParallel | 35.8 | psi | ASTM C-273 |
| Tensile Modulus Parallel | 4810 | psi | ASTM D-1623 |
| Tensile Modulus Perpendicular | 3490 | psi | ASTM D-1623 |
| Tensile Strength Perpendicular | 41.5 | psi | ASTM D-1623 |
| Tensile StrengthParallel | 38.9 | psi | ASTM D-1623 |
Storage & Handling
- Storage
Avoid moisture contamination during storage, handling, and processing. Store the polyol and isocyanate components from 65°F to 85°F. Do not expose isocyanate component to lower temperatures as freezing may occur
- Shelf Life
The shelf life is 12 months if stored in original unopened containers.
- Health and Safety Information
Safety Data Sheets are available which provide information concerning the health and safety precautions that must be observed when handling this product. Before working with this product, you must read and become familiar with the available information on the risks involved, proper use, and handing. All polyurethane foam burns in varying degrees, which in turn liberates toxic gasses; the foam should be evaluated in its final form for compliance to existing standards in your industry. Nothing contained herein grants or extends a license, express or implied, in connection with patents, issued or pending, of the manufacturer or others. The information contained herein is based on the manufacturer's own study and the works of others. The manufacturer makes no warranties, expressed or implied, as to the accuracy, completeness, or adequacy of the information contained herein. The manufacturer shall not be liable (regardless of fault) to the vendee's employees, or anyone for any direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of such information