Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Recommended Applications
- Used in the manufacture of fire-resistant mica tape and high temperature pressure sensitive tape.
- Used for masking and sheet metal tape.
- Used alone, as a variety of bonding, fixing or supporting adhesives.
- Instruction for Use
- SilibaseSR-6022 is a fast-drying adhesive with short curing time and strong viscosity. After curing, the mica tape is dry, soft and does not stick.
- The SilibaseSR-6022 Silicone Glue for Mica Tape be directly applied to the substrate by a conventional tape coating apparatus and can be further diluted with a solvent such as toluene or xylene before coating. The working fluid concentration is preferably 15-20%. Ventilation must be ensured when using solvents, and please observe the solvent supplier's safety precautions and related regulations.
- The curing agent may be a peroxide such as BPO or DPP, and BPO is recommended, and the amount is 1.0-3.0% of the amount of 100%. The use of a curing agent can speed up the curing or allow curing at low temperatures, and can also increase the cohesive strength of the adhesive and improve its adhesion to the substrate.
- When using BPO, it should be dissolved in toluene and formulated into a 10% solution to achieve optimal mixing with the binder. The peroxyl dispersion after mixing can only be used for one to two days because the peroxide quickly loses its activity in the solvent. Adequate dispersion of the adhesive and peroxide during the mixing process is necessary to ensure consistency in the finished product.
- Surface curing period: 60~90℃*1min solvent removal to ensure no solvent exists in the adhesive when entering the curing zone; 140~170℃*2min, adhesion, cohesive strength and initial heat by heat curing The adhesion is further strengthened.
- If the equipment and substrate allow for higher curing temperatures, the cure time can be shortened. Increasing the curing temperature allows the cohesive strength of the adhesive to be achieved in a shorter time than low temperature curing.
Properties
- Physical Form
- Appearance
- Colorless Or Light-Yellow Translucent Liquid, No Mechanical Impurities
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solid content (150°C,2h) | 50±1 | % | — |
| Density at 25°C | 0.98-1.02 | — | — |
| Thinner | Toluene | — | — |
| Viscosity (25Cmm 2.S ~ 1) | min. 20000 | — | — |
Safety & Health
- Product Safety
Everything that is applied and used in this product must be carried out in accordance with various relevant national quality, hygiene, safety and environmental protection standards and regulations. This product should be recommended for use at the production site by professional operators (or trained and authorized personnel) in accordance with product specifications, construction application instructions, MSDS (Hazardous Chemical Safety Data Sheet) and certification on packaging containers. This product may not be used without reading the above information, especially MSDS.
The following items related to the product can be found in the chapters of the provided MSDS:
- Dangerous characteristics
- Firefighting methods and extinguishing agents and firefighting precautions
- Operational precautions and safety precautions, transportation precautions
- Packaging Disposal Methods: Empty containers may contain harmful substances and comply with international standards, national standards, environmental and safety laws and regulations, and local regulations. After the final product is recovered, residual products such as powders, liquids, viscous materials, etc. in all containers must be removed from the container. Residual, discarded materials and containers should be recycled in accordance with environmental regulations.
Packaging & Availability
- Packaging
Put it into a clean and dry 200kg large iron drum and seal it.
Storage & Handling
- 5
During storage and transportation, it must be placed in a cool, ventilated and dry environment to prevent rain and sunlight. Avoid contact with acids, alkalis or basic compounds and heavy metals. The storage period is 6 months. Overdue can be re-examined according to the standard. Qualified persons can still use and store and transport according to flammable products.