Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features, Benefits & Advantages
Seals cracked and alligatoring asphalt surfaces Dries to a durable finish Excellent base primer for reflective coatings
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Uses
KARNAK 220 Fibered Emulsion may be used on smooth surface BUR, smooth or granular APP and SBS modified bitumen membranes, metal roofs and concrete as a protective coating. Ideal as a prime coating prior to application of a reflective roof coating. Also may be used in KARNAK’s “220 System” for cold-applied roof maintenance.
- Surface Preparations
All surfaces should be clean, dry, and free from oil, grease, dust, dirt, loose paint or other foreign matter prior to application. Recommended application temperature is 40°F to 120°F. Repair all blisters, breaks and cracks with 19 Ultra Rubberized Flashing Cement and 31 Fiberglass Membrane or 34 Asphalt Saturated Cotton Fabric.
- Application
220 Fibered Emulsion Coating is easily applied by brush or spray equipment. Apply 220 Fibered Emulsion Coating in one coat. If applying two coats, allow the first coat to dry. Coating should be continuous and free of pinholes and holidays. Cover all slots, joints and grooves and apply into all chases and corners. BRUSH APPLICATION 220 Fibered Emulsion Coating is easily applied with a wide fiber roof brush using wide even strokes, flowing the coating on the surface to obtain a smooth and uniform film. Make sure to brush into all cracks and crevices. SPRAY APPLICATION 220 Fibered Emulsion Coating may be easily and efficiently spray applied on large areas with a standard heavy-duty airless spray unit. Utilize a standard heavy-duty airless spray pump using heavy duty guns and nozzles. Equipment manufacturer should be consulted for more complete information
- Coverage Rate
Apply at 4 gallons per 100 sq. ft. (64 wet mils) which will provide adequate protection for most surfaces. Spray application should be at the same rate.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Weight per Gallon | 9.2 lbs | - | - |
| Solids by Weight | 52% Nominal | - | - |
| Solids by Volume | 49% Nominal | - | - |
| Color | Black | - | - |
| Permeance | 0.5 metric perms | - | - |
| Application Temp. | 40°F to 120°F | - | - |
| Cure Time | 24 to 48 hours @ 77°F and 50% Relative Humidity | - | - |
| Service Temp (Cured Film) | -5°F to 180°F | - | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Caution
Do not apply when rain is imminent. Protect from freezing. Coating must be dried before exposure to water. Store in a heated room and keep container covered when not in use. Do not thin. Avoid prolonged contact with skin. Dispose of in an environmentally safe manner. For exterior use only.
Packaging & Availability
- Packaging Type
- Packaging
Available in 5-gallon pails, 55-gallon drums and 275 gallon totes.