Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Basis
- One-component Acrylic Resin
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- General Characteristics
- Applied on asphalt and cement waterproofed surfaces without rising humidity issues, following the application of ELASTOSPORT 853 or SUPER ELAST°COAT 842.
- It can be also combined with prefabricated sh°Ck-absorbent rolls in thickness of 4mm to 14mm or a rubber mixture of SBR granules plus PU BINDER.
- Ideal for basketball, volleyball, handball, football and tennis external courts. Suitable for sports centers, schools, fitness centers, pavements, hallways.
- Applied easily, having low cost.
- Provides a safe, high quality game.
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Preparation
Applied only on dry surfaces, without rising humidity issues and free of materials that might prevent bonding e.g. dust, loose particles, grease etc. The success in the application depends on the right preparation of the underlay and use of the material.
- Good, dry cleaning of the surface from dust and residues with vacuum cleaner and squeegees.
- Priming of the surface, except in case of using sh°Ck-absorbent rolls, with bonding resin primer RITIVEX 1102 for the proper adhesion of the sub-floor. Application of one or more layers until the surface is saturated. Avoid the creation of puddles of the material.
- When the primer dries (approximately 1 hour depending on the ambient temperature), follows the application of ELASTOSPORT 853 for sealing the pores of underlay. Alternatively, the substrate can be prefabricated sh°Ck-pad in thickness 4-14mm or an insitu rubber sh°Ck-pad of SBR granules plus PU BINDER.
- As soon as ELASTOSPORT 853 or SUPER ELAST°COAT 842 dries, follows theapplication of ELASTOTURF 851.
- Depending on the ambient temperature ELASTOTURF 851 is diluted to 2-3 % water, prior to application, in order to achieve better fluidity. It is applied, in two or more coatings depending on the desirable thickness. The next layer follows the other after the previous is dry.
- The next day, depending ambient temperature follows application of finishing paint ELASTOMARK 818.
- Consumption
- 1.5 kg/m² of ELASTOTURF 851 (three layers, for System Sportfloor-Ex Hard Court).
- 1.8 kg/m² of ELASTOTURF 851 (three layers, for System Flexfloor - Ex).
- 2.2-2.5 kg/m² of ELASTOTURF 851 (three layers, for System Polyflex AEL - Ex).
- 3.5-3.8 kg/m² of ELASTOTURF 851 (three layers, for System Wet Pour Polyflex AEL -Ex).
In case of using the top coat ELASTOMARK 818 as final layer then the consumption of ELASTOTURF 851 will be:
- 1 kg/m² of ELASTOTURF 851 (two layers, for System Sportfloor- Ex Hard Court).
- 1.3 kg/m² of ELASTOTURF 851 (two layers, for System Flexfloor-Ex).
- 1.7- 2 kg/m² of ELASTOTURF 851 (two layers, for System Polyflex AEL-Ex).
- 3- 3.3 kg/m² of ELASTOTURF 851 (two layers, for System Wet Pour Polyflex AEL-Ex).
- Application Tools
Squeegee. Tools should be cleaned with WATER immediately after use.
Properties
- Appearance
- Viscous Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.70-1.80 | Kg/lt | - |
| Temperature (For the Application and Drying of the Material) | 10-40 | °C | - |
| Total Hardening (25°C) | 5.0 | days | - |
| Viscocity (25°C) | 15.0-22.0 | mPa.s | - |
| Walkability (25°C) | min. 24 | hours | - |
Technical Details & Test Data
- Remarks
- In case of extremely rough and sharp cement or asphalt surfaces it is recommended grinding of the surface with a mosaic machine, sandblast or rotor machine before the application of ELASTOSPORT 853.
- During temperatures over 40°C, ideal time for the application of ELASTOTURF 851 is between 22:00 - 9:00 a.m., and the minimum bearing temperature during application anddrying should be 10°C.
- The freshly coated surface should be protected from high temperatures, wind, rain and frost for at least the first 24 hours.
- In case it gets damaged, it is simply repaired and recoated on the spot.
Safety & Health
- Caution
The application must take place in well-aired places using protective gloves. Skin or eye contact must be avoided, otherwise wash carefully with soap and water.
Packaging & Availability
- Packaging Type
- Packaging
Supplied in barrels 200 Kg.
Storage & Handling
- Storage
12 months in unopened containers in dry places with minimum temperature 5°C and high temperature 30°C (avoid sunlight).