Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Basis
- One-component Acrylic Resin
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- General Characteristics
- Applied on asphalt or cement waterproofed surfaces without rising humidity issues following the application of ELASTOSPORT 853.
- It is recommended mixing of ELASTOTURF 851-CON with quartz sand and water in ratio of 1 part of ELASTOTURF 851-CON (28.5%), 2 parts of quartz sand (57.2%) and 0.5 parts of water (14.3%) by weight.
- Ideal for basketball, volleyball, handball, football and tennis external courts. Suitable for sports centers, schools, fitness centers, pavements, hallways.
- Applied easily, having a low cost.
- Provides a safe, high quality game.
- For the creation of lines in sport courts it is recommended the use of acrylic paint ELASTOMARK in any desirable color.
Applications & Uses
- Markets
- Application Method
- Preparation
Applied only on dry surfaces. Protected from rising humidity and free of materials that might prevent bonding e.g. dust, loose particles, grease etc. The success in the application depends on the right preparation of the underlay and use of the material.
- Good, dry cleaning of the surface from dust and residues with vacuum cleaner.
- Priming of the surface, except in case of using sh°Ck-absorbent rolls, with joining resin RITIVEX 1102 for the proper adhesion of the sub-floor. Application of the material in one or more layers until the surface is saturated. Avoid the creation of puddles of the material. Consumption: 150-200gr/m2 in two layers, depending on the absorption of the underlay.
- When the primer begins to dry (approximately one hour depending on the ambient temperature), follows the application of ELASTOSPORT 853 for sealing the pores of the underlay. Alternatively, the substrate can be prefabricated sh°Ck-pad in thickness 4-12 mm or an in-situ rubber sh°Ck-pad of SBR plus PU BINDER.
- As soon as the material dries (within 24 hours at 25 0C), follows the application of ELASTOTURF 851-CON mixed with quartz sand and water, in ratio of 1 part of ELASTOTURF 851-CON (28.5%), 2 parts of quartz sand (57.2%) and 0.5 parts of water (14.3%) by weight.
- Consumption
0.2-0.21 kg/m²/layer of ELASTOTURF 851-CON.
- Application Tools
Rubber squeegee. Tools should be cleaned with WATER immediately after use.
Properties
- Appearance
- Viscous Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.0-1.1 | Kg/lt | — |
| Temperature (For the Application and Drying of the Material) | 10-40 | °C | — |
| Total Hardening (25°C) | 5.0 | days | — |
| Viscocity (25°C) | 5.0-13.0 | mPa.s | — |
| Walkability (25°C) | min. 24 | hours | — |
Technical Details & Test Data
- Remarks
- Application of ELASTOTURF-CON/HD, hard version, for SPORTFLOOR SYSTEM, and application of ELASTOTURF-CON/F, flexible version, for wet-pour systems or on sh°Ckpad rolls.
- In case of extremely rough cement or asphalt surfaces it is recommended grinding of the surface with a mosaic machine before the application of ELASTOSPORT 853.
- Our recommendation is that the asphalt subfloor should be applied on well compacted 150 mm road base subfloor and asphalt should be laid in one layer(and not 2) in 6 to 8 cm with fine and coarse aggregates (up to 15mm granulometry) like the kind of asphalt used in road construction.
- So, new road-grade asphalt will have to be laid (minimum 60mm) in one layer containing coarse aggregates and then mature for 30 days at least, before any application takes place on top of the asphalt to avoid bubbles on the final layer of the sport or rubber floorings.
- During summer or in condition of very hot climates, ideal time for the application of the material is between 22:00 p.m. and 9:00 a.m. and the minimum bearing temperature during application and drying should be 10°C.
- The freshly coated surface should be protected from high temperatures, wind, rain and frost for at least the first 24 hours.
- In case it gets damaged, it is simply repaired and recoated on the spot.
Safety & Health
- Caution
The application must take place in well-aired places using protective gloves. Skin or eye contact must be avoided, otherwise wash carefully with soap and water.
Packaging & Availability
- Packaging Type
- Packaging
Supplied in 100 kg barrels.
Storage & Handling
- Storage
12 months in unopened containers in dry places with minimum temperature 5°C and high temperature 30°C (avoid sunlight).