Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Uses
Grade PVC-S-5868PG is used for the production of films and bulk plastic packaging for food and consumer goods.
Properties
- Appearance
- consistent white powder
- Typical Properties
Value | Units | Test Method / Conditions | |
Bulk Density | 0.50–0.60 | g/cm3 | — |
Sieve residue mesh No. 0400 | none | % | — |
Content of impurities and foreign matter | max. 20 | pcs, | — |
Content of moisture and volatile matter | max. 0.5 | wt% | — |
Film thermal stability at 160°С | min. 10 | minutes | — |
Flowability | not defined | — | — |
K-value | 58–60 | — | — |
Mass fraction of vinyl chloride | max. 5 | ppm | — |
Number of transparent points (fish eye) in 0.1 cm-3 | max. 20 | pcs | — |
Plasticizer absorption g per 100 g of PVC | min. 15 | — | — |
Sieve residue mesh No. 0063 min. | min. 85 | % | — |
Technical Details & Test Data
- SPECIAL PROPERTIES
Polyvinyl chloride is a combustible substance. Flash point of air-suspended particles is 624°C, aerogel self-ignition point is 486°C. Polyvinyl chloride does not burn and is not explosive on contact with water, acids, alkalis and aerial oxygen.
Packaging & Availability
- Packaging Type
- PACKAGING AND TRANSPORTATION
The suspension polyvinyl chloride should be packed into three- or six-ply paper bags, in special big bags made of polypropylene fabric. PVC-S can be transported by rail and by road. Polyvinyl chloride in bags, transport packs and special big bags should be stored indoors at least one meter away from heating devices at a temperature below 35°С and maximum relative humidity of 75%. It can be stored under a shed in storage areas protected from direct sunlight and precipitation