Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Uses
Suspension polyvinyl chloride grade PVC-S-6149 U is intended for processing PVC into plasticized and unplasticized general-purpose products such as “rigid” products (pipes, finishing sections) and “soft” shoe compounds.
Properties
- Appearance
- consistent white powder
- Typical Properties
Value | Units | Test Method / Conditions | |
Sieve residue mesh No. 0315 | none | % | - |
Bulk Density | 0.50–0.60 | g/cm3 | - |
Content of impurities and foreign matter | max. 8 | pcs, | - |
Content of moisture and volatile matter | max. 0.3 | wt% | - |
Film thermal stability at 160°С | min. 15 | minutes | - |
Flowability | max. 12 | s | - |
K-value | 61–63 | - | - |
Mass fraction of vinyl chloride | max. 1 | ppm | - |
Number of transparent points (fish eye) in 0.1 cm-3 | max. 5 | pcs | - |
Plasticizer absorption g per 100 g of PVC | min. 19 | - | - |
Sieve residue mesh No. 0063 min. | min. 95 | % | - |
Sieve residue mesh No. 0200 | max. 26 | % | - |
Sieve residue mesh No. 0250 | max. 5 | % | - |
Technical Details & Test Data
- SPECIAL PROPERTIES
Polyvinyl chloride is a combustible substance. Flash point of air-suspended particles is 624°C, aerogel self-ignition point is 486°C. Polyvinyl chloride does not burn and is not explosive on contact with water, acids, alkalis and aerial oxygen.
Packaging & Availability
- Packaging Type
- PACKAGING AND TRANSPORTATION
The suspension polyvinyl chloride should be packed into three- or six-ply paper bags, in special big bags made of polypropylene fabric. PVC-S can be transported by rail and by road. Polyvinyl chloride in bags, transport packs and special big bags should be stored indoors at least one meter away from heating devices at a temperature below 35°С and maximum relative humidity of 75%. It can be stored under a shed in storage areas protected from direct sunlight and precipitation.