Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Application
Grade PE2NT76-17 is intended for further processing by extrusion blow molding method into domestic and industrial-use articles with a capacity of up to 3 liters such as flasks, water bottles, bottles for household chemistry and cosmetics.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density at 23°C | 955 - 961 | kg/m3 | — |
Density at 20°C | 957 - 963 | kg/m3 | — |
Melt Flow Index at 190 °С and Load of 49 N (5kgf) | 2.3 - 3.0 | g/10 min | — |
Melt Flow Index Spread within a Batch | ± 10 | % | — |
Number of Inclusions | max. 5 | pieces | — |
Weight Content of Ash | max. 0.03 | % | — |
Weight Content of Volatile Substances | max. 0.09 | % | — |
Tensile Yield Strength | min. 26 | MPa | — |
Rupture Strength | min. 30 | MPa | — |
Elongation at Break | min. 750 | % | — |
Cracking Resistance | min. 30 | hours | — |
Packaging & Availability
- Packing
Product is packed in polyethylene bags (one bag net weight 25.00±0.25kg) and stacked on flat pallets with shrink film. Maximum gross weight of a bundle is 2 tons.
- Transportation
By all modes of transport.
Storage & Handling
- Storage
Polyethylene shall be stored in enclosed dry space preventing from direct sunlight on shelves or pallets at least 5 cm from the floor and at least 1 m from heaters, at temperature max 30°C, relative humidity max 80 %. Prior to processing bags with polymer shall be kept in production area for at least 12 hrs.