Products

Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.

Synbar™ N50HF is a first intent, neutral barium sulfonate designed to provide excellent demulsibility, detergency, and optimal non-staining rust protection. It is ideal for applications where superior rust and corrosion protection are needed. Synbar™ N50HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

The Jalpon™ 1400 are stable emulsions of gelled calcium sulfonate in water, featuring low VOC and low odor. The products in this emulsion series are compatible with a wide range of waterborne and water dispersible resin systems.

Synbar™ OB70 (Overbased) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

K-Ox™ 9080-55HF and 9080-70HF are economical calcium soaps of oxidized petrolatum used in rust preventive compounds. K-Ox™ 9080-55HF and 9080-70HF have been reduced with solvent to reach non-volatile contents of 55% and 70% respectively. They will deposit dark amber waxy films upon evaporation of the solvent. They are especially synergistic with gelled calcium sulfonate such as Kimes Technologies’ Jalpon™ products.

Jalpon™ 1700HF is a concentrated, highly thixotropic gelled sulfonate in mineral spirits. It is designed to allow the easy formulation of solvent-based industrial coatings with a wide variety of raw materials. Jalpon™ 1700HF will offer superior corrosion protection and resistance to dripping, sag, and unwanted flow in finished coatings. Jalpon™ 1700HF is highly concentrated and should be formulated by blending with a variety of film formers such as oils, waxes, resins, and/or petrolatum products. Jalpon™ 1700HF can be used as an additive to improve rheological characteristics in paints, rust preventives, and coatings. Jalpon™ 1700HF also aids in the dispersion of pigments in highly formulated coatings.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Synbar™ N50 (Neutral) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.

Jalpon™ 1760LF is concentrated, thixotropic gelled sulfonates in mineral spirit carriers. Their high solids content allows for easy formulation of reduced VOC solvent-based industrial coatings. Jalpon™ 1760LF is compatible with a wide variety of raw materials and will offer superior corrosion protection and resistance to dripping and flow in finished coatings. Jalpon™ 1760LF should be further formulated by blending with other film formers such as oils, waxes or petrolatum to insure a continuous film and optimum performance. In addition to corrosion protection, they impart good rheology characteristics to paints, rust preventives, and coatings. Jalpon™ 1760LF can also be of value in the dispersion of pigments in highly formulated coatings.

Oleum Sulfonated Synthetic Sodium Sulfonates Synsul™ 415, 450, and 500 are oil soluble, oleum sulfonated synthetic sodium sulfonates. Synsul™ 415 and 450 have good affinity for water making them excellent components in emulsifier packages. Synsul™ 500 displaces water, making it a good rust and corrosion inhibitor component.

Syncal™ N57C and N57HF are cost efficient mid-base calcium sulfonates that will lend detergent, dispersant, acid neutralizing, and corrosion inhibiting characteristics to a variety of rust preventives and lubricants. The dispersed soluble CaCO3 helps to neutralize acids, such as HCl, thereby enhancing rust inhibiting characteristics when used in combination with other EP/AW additives like chlorinated paraffin.

Jalpon™ 5312 is a high solids, lower VOC rust preventive concentrate comprised of gelled calcium sulfonate, oxidate, waxes and other ingredients which yields a relatively dripless, long term waxy rust preventive coating.

Syncal™ OB400 is specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB400 is excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.

Syncal™ N57C and N57HF are cost efficient mid-base calcium sulfonates that will lend detergent, dispersant, acid neutralizing, and corrosion inhibiting characteristics to a variety of rust preventives and lubricants. The dispersed soluble CaCO3 helps to neutralize acids, such as HCl, thereby enhancing rust inhibiting characteristics when used in combination with other EP/AW additives like chlorinated paraffin.

Branched Sodium Sulfonate Synsul™ 455BR is a unique medium molecular weight sodium sulfonate derived from a branched alkylate. This product is easily formulated into soluble oil bases, semi-synthetic fluids and other metalworking compounds as an emulsifier and rust inhibitor. The branched structure aids in inherent bio-stability. Therefore, fluids derived from Synsul™ 455BR may exhibit longer fluid life than those formulated with either linear or natural sodium sulfonates.

Synbar™ OB70HF is a cost effective overbased barium sulfonate. This product will provide the formulator with excellent demulsibility, detergency, and optimal non-staining rust and corrosion protection, even under acidic conditions. Synbar™ OB70HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Syncal™ OB320 is specialty overbased calcium sulfonates that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricants, greases, industrial oils, rust preventives, and metalworking fluids. Syncal™ OB320 is excellent feedstocks for the manufacture of overbased calcium sulfonate greases and gelled coatings.

K-Ox™ P600/45 is a synthetic fatty acid made from petroleum hydrocarbons. K-Ox™ P600/45 may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. It is not subject to bacterial degradation as are the natural fats. K-Ox™ P600/45 is a rust preventive intermediate which is readily converted to a variety of metallic soaps.

Jalpon™ 1500A is a rust preventive base compound that is comprised primarily of gelled calcium sulfonate and a proprietary wax blend. The combination of high non-volatiles and moderately high viscosity will produce firm and waxy films that performs well under severe conditions, particularly salt environments. This product can be used “as is”, further diluted or formulated, using a variety of compatible coating components.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.

The Jalpon™ 1400EX is stable emulsions of gelled calcium sulfonate in water, featuring low VOC and low odor. The products in this emulsion series are compatible with a wide range of waterborne and water dispersible resin systems. Jalpon™ 1400A contains an extra component for barrier protection while Jalpon™ 1400EX contains significantly more active calcium sulfonate for increased surface wetting in more demanding applications.

Jalpon™ 1300A is a thixotropic gelled overbased calcium sulfonate in mineral spirits containing waxes and other proprietary ingredients. A variety of solvent-based industrial coatings can be made by incorporating materials such as resins, waxes, asphalts, oils and/or other ingredients. Specialty coatings can be developed which impart superior corrosion protection, flow control, high film build, and sag resistance.

K-Ox™ 9080-55HF and 9080-70HF are economical calcium soaps of oxidized petrolatum used in rust preventive compounds. K-Ox™ 9080-55HF and 9080-70HF have been reduced with solvent to reach non-volatile contents of 55% and 70% respectively. They will deposit dark amber waxy films upon evaporation of the solvent. They are especially synergistic with gelled calcium sulfonate such as Kimes Technologies’ Jalpon™ products.

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Synthetic Sodium Sulfonate Synsul™ 445N is a medium molecular weight sodium sulfonate derived from a specialty alkylate to ensure consistent performance quality. This product is easily formulated into soluble oil bases, semi-synthetic fluids and other metalworking compounds as an emulsifier and rust inhibitor.

Synbar™ OB68 is a cost effective overbased barium sulfonate offering excellent demulsibility, detergency, and optimal non-staining rust and corrosion protection, even under acidic conditions. It also exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Jalpon™ 1760HF is concentrated, thixotropic gelled sulfonates in mineral spirit carriers. Their high solids content allows for easy formulation of reduced VOC solvent-based industrial coatings. Jalpon™ 1760HF are compatible with a wide variety of raw materials and will offer superior corrosion protection and resistance to dripping and flow in finished coatings. Jalpon™ 1760HF should be further formulated by blending with other film formers such as oils, waxes or petrolatum to insure a continuous film and optimum performance. In addition to corrosion protection, they impart good rheology characteristics to paints, rust preventives, and coatings. Jalpon™ 1760HF can also be of value in the dispersion of pigments in highly formulated coatings.

Jalpon™ 14000A is stable emulsions of gelled calcium sulfonate in water, featuring low VOC and low odor. The products in this emulsion series are compatible with a wide range of waterborne and water dispersible resin systems. Jalpon™ 1400A contains an extra component for barrier protection while Jalpon™ 1400EX contains significantly more active calcium sulfonate for increased surface wetting in more demanding applications.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

Synbar™ N58 is a neutral barium sulfonate with a very low base number. The high active content of Synbar™ N58 offers the formulator more flexibility and superior wetting and demulsibility characteristics. It is an extremely good rust and corrosion inhibitor for any lubricant and coating application where improved performance is needed.