Products

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

K-KAT® 5218 is an aluminum chelate complex catalyst that provides an excellent blend of both fast dry time and increased pot life when used in combination with 2,4 pentanedione. It is recommended for 2K polyurethanes, pultrusion and RIM applications.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

DISPARLON® 6700 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties particularly for high build epoxies.

NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid/carboxylate complex. It is effective in both waterborne and solventborne coatings and improves corrosion resistance and water resistance.

NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It has excellent performance in waterborne and solventborne systems and is highly recommended for low pH applications.

NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. Improves water resistance by providing a barrier effect and reducing water permeation of the coating.

NACORR® XR-418 is a liquid corrosion inhibitor based on the salt of an aromatic sulfonic acid/carboxylate derivative and is specifically designed for aluminum and zinc alloys.

NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid offering good stability and enhanced cure rate of amino crosslinked systems.

NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid, offering excellent adhesion for solvent-based primers. It is catalytic in amino systems and has the best synergy with Zinc ACPs.

DISPARLON® F-9030 is a thixotropic agent based on a fatty acid amide wax pre-activated in benzyl alcohol and is effective for increasing viscosity. Provides anti-sagging/anti-settling in non-solvent systems.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

NACORR® 1153 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It is supplied in a HAPS free solvent and is effective in waterborne and solventborne systems.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. NACORR® 1652 provides excellent adhesion with outstanding performance in waterborne primers.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

K-STAY® 511 is a liquid thixotrope for pigmented solventborne applications. It is a pourable liquid which makes for ease of use in production.

NACORR® 1352 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It is compatible with waterborne and solventborne systems and offers an excellent balance of compatibility and performance.

K-POL® 8211 is a unique, aliphatic diol recommended for 2K PU general purpose coatings and elastomers. It provides chemical and stain resistant, scratch resistances and hard films with good flexibility.

NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. NACORR® 1351 promotes pigment dispersion when a small amount is used in the grind, thereby reducing grind time, increasing pigment loading, and improving color strength. It improves gloss properties when used as a dispersant in the grind.

DISPARLON® L-1983N is a silicone-free acrylic polymer surface control additive for leveling properties in low polarity systems such as epoxy primers and epoxy/acrylic UV cure inks.