Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
- Main Group
Disinfectants and biocidal products
- Product Type
It is a biocidal product intended for the disinfection of microaeroflora.
- Active Substances
- Didecyldimethylammonium chloride, concentration in metric units 18 g%
- Quaternary ammonium compounds, benzyl-C12-C18-alkyldimethyl, chlorides, concentration in metric units 2,8 g%
- Poly (hexamethylenebiguanide), Polymer concentration in metric units 1.3 g%
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Advantages
- High level disinfectant for the indoor air
- Certified virucidal, fungicidal, bactericidal and sporicidal action
- Alcohol & aldehydes & phenols free
- Rapid disinfection e ect
- Tested according to EU regulations in force
Applications & Uses
- Markets
- Applications
- User Categories
- Professional
- Industrial
- Population
The product can be used successfully in medical offices and hospitals, commercial spaces, public institutions, operators in the HoReCa industry, communities, but also by home users and industrial users.
- How to Use
It is used undiluted 10 ml / m³, with an action time of 5 minutes – for medium and low-level disinfection. Dilute to 2%, 20 ml of product, over which you can add water up to 1L to obtain the working solution.
The disinfectant is introduced into the nebulizer (10 ml/1m3) and the nebulizer can start for approximately 30 minutes (depending on the technical characteristics of the device), then the solution is left to act for a minimum of 10 minutes.
During nebulization and actuation of the working solution, the room in which the nebulization is performed must have all the doors and windows closed and there must be no people inside. After about 40 minutes it is necessary to ventilate the room.
Use only after the instructions for use have been read and understood. It is recommended to store in closed, clean, well ventilated spaces, with temperatures between +5°C and +30°C. Each delivery batch will be accompanied by the quality certification document, drawn up according to the legal provisions in force, respectively the declaration of conformity drawn up on the basis of the technical sheets, the analysis bulletins and the sanitary approval.
- Application
- Medical offices and hospitals
- Commercial spaces
- Educational institutions
- Other public institutions
- Operators in the HoReCa industry
- Office spaces
- Home users
- Industrial users
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Volume | 5.0 | Liters | - |
Regulatory & Compliance
- Regulatory
Approval issued by the National Commission for biocidal products: No. 2267BIO/02/12.24.