Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Characteristics
• UV stabilizer
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- High viscosity
- 0% UV light transmittance at wavelength below 380 nm
- Applications
- Sheet
- Appliances
- Optical lens
- Film
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Optical Properties
Value | Units | Test Method / Conditions | |
Melt Flow Rate (300°C, 1.2 kg) | 5 | g/10 min | ASTM D 1238 |
Density | 1200 | kg/m³ | ASTM D 792 |
Mold Shrinkage | 0.005 - 0.007 | mm/mm | ASTM D 955 |
Water Absorption (24 hrs, 23°C) | 0.15 | % | ASTM D 570 |
Water Absorption (50%RH, 23°C) | 0.32 | % | ASTM D 570 |
Value | Units | Test Method / Conditions | |
Tensile Yield Strength | 60 | MPa | ASTM D 638 |
Ultimate Tensile Strength | 72 | MPa | ASTM D 638 |
Elongation at Yield | 6 | % | ASTM D 638 |
Elongation at Break | 150 | % | ASTM D 638 |
Tensile Modulus | 2410 | MPa | ASTM D 638 |
Flexural Strength | 96 | MPa | ASTM D 790 |
Flexural Modulus | 2410 | MPa | ASTM D 790 |
Notched lzod Impact (23°C) | 950 | J/m | ASTM D 256 |
Unnotched Izod Impact (23°C) | No break | — | ASTM D 256 |
Instrumented Dart Impact, Total Energy (23°C) | 94 | J | ASTM D 3763 |
Rockwell Hardness | 74 | M Scale | ASTM D 785 |
Taber Abrasion Resistance (A Haze) | 45 | % | ASTM D 1044 |
Value | Units | Test Method / Conditions | |
Deflection Temperature Under Load (4 mm at 66 psi, Annealed) | 146 | °F | ASTM D 648 |
Deflection Temperature Under Load (264 psi, Annealed) | 143 | °C | ASTM D 648 |
Deflection Temperature Under Load (264 psi, Unannealed) | 132 | °C | ASTM D 648 |
Vicat Softening Point (50°C/hr, 50N Load) | 151 | °C | ASTM D 1525 |
Coefficient of Linear Thermal Expansion (-40 - 82°C) | 68 x 10^-6 | mm/mm/°C | ASTM D 696 |
Value | Units | Test Method / Conditions | |
Ignition Resistance (0.5 mm) | V-2 | UL-94 | ASTM D635 |
Ignition Resistance (1.6 mm) | V-2 | UL-94 | ASTM D635 |
Ignition Resistance (2.5 mm) | V-2 | UL-94 | ASTM D635 |
Ignition Resistance (UL-94, 0.5mm) | V-2 | — | ASTM D635 |
Ignition Resistance (UL-94, 1.6mm) | V-2 | — | ASTM D635 |
Ignition Resistance (UL-94, 2.5mm) | V-2 | — | ASTM D635 |
Ignition Resistance (UL-94, 3.0mm) | V-2 | — | ASTM D635 |
Limiting Oxygen Index | 26 | % | ASTM D 2863 |
Ball Indentation Temperature | min. 125 | °C | IEC 598-1 |
Average Extent of Burning | 25 | mm | ASTM D 635 |
Value | Units | Test Method / Conditions | |
GWT (2.0 mm, 5 second) | 850 | °C | IEC 695-2-1 |
Compression Tracking Index (2.0 mm) | 250 | V | IEC 112 |
Dielectric Strength | 17 | KV/mm | ASTM D 149 |
Dielectric Constant (60 Hz) | 3 | Hz | ASTM D 150 |
Dissipation Factor (60 Hz) | 0.001 | — | ASTM D 150 |
Volume Resistivity (23°C, Dry) | 2.0 x 10^17 | cm | ASTM D 257 |
Value | Units | Test Method / Conditions | |
Refractive Index (Nd) | 1.586 | — | ASTM D 542 |
Light Transmittance | 89 | % | ASTM D 1003 |
Haze | 0.7 - 1.5 | % | ASTM D 1003 |