Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
Properties
- Physical Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Density | 1.2 | g/cm³ | ISO 1183 |
Melt Mass Flow Rate (300°C, 1.2 Kg) | 7.9 | g/10 min | ISO 1133 |
Melt Volume-Flow Rate (300°, 1.2 Kg) | 7.4 | cm³/10min | ISO 1133 |
Molding Shrinkage (Across Flow) | 0.50 - 0.70 | % | Internal Method |
Molding Shrinkage (Flow) | 0.50 - 0.70 | % | Internal Method |
Water Absorption (Saturation, 23°C) | 0.24 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Tensile Modulus | 2400 | MPa | ISO 527-2/1 |
Tensile Yield Stress | 60 | MPa | ISO 527-2/50 |
Tensile Yield Strain | 5.5 | % | ISO 527-2/50 |
Tensile Break Strength | 110 | % | ISO 527-2/50 |
Flexural Modulus | 2300 | MPa | ISO 178 |
Flexural Stress | 93 | MPa | ISO 178 |
Value | Units | Test Method / Conditions | |
Charpy Notched Impact Strength (23°) | 84 | kJ/m² | ISO 179 |
Charpy Unnotched Impact Strength (23°) | No Break | - | ISO 179 |
CLTE Flow | 6.5E - 5 | cm/cm/°C | ISO 11359-2 |
CLTE Transverse | 6.6E - 5 | cm/cm/°C | ISO 11359-2 |
Drying Temperature (Hot Air Dryer) | 120 | °C | - |
Drying Time (Hot Air Dryer) | 4.0 - 8.0 | Hrs | - |
Rear Temperature | 260 - 300 | °C | - |
Middle Temperature | 260 - 300 | °C | - |
Front Temperature | 260 - 300 | °C | - |
Nozzle Temperature | 260 - 300 | °C | - |
Mold Temperature | 80 - 120 | °C | - |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (0.45 MPa, Unannealed) | 145 | °C | ISO 75-2/B |
Heat Deflection Temperature (1.8 MPa, Unannealed) | 131 | °C | ISO 75-2/A |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 6000000000000000 | ohms | IEC 60093 |
Volume Resistivity | 30000000000000000 | ohms/cm | IEC 60093 |
Electric Strength (1.00 mm) | 31 | kV/mm | IEC 60243-1 |
Electric Strength (3.00 mm) | 18 | kV/mm | IEC 60243-1 |
Dielectric Constant (1 MHz) | 3.1 | MHz | IEC 60250 |
Dielectric Constant (100 MHz) | 3.1 | MHz | IEC 60250 |
Dissipation Factor 1 MHz | 0.009 | g/10min | IEC 60250 |
Dissipation Factor 100 MHz | 0.0006 | g/cm³ | IEC 60250 |
Packaging & Availability
- Country Availability
- Regional Availability