Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
Applications & Uses
- Markets
- Applications
- Application Technique
- Applications
(with fungicides or foliar nutrients) may be made at a rate of 4-8 ounces per acre (per application). Total season application should not exceed 48 ounces per acre.
APPLICATION TIMING RATE/ACRE APPLICATION LAWN & TURFGRASSES (All turfgrasses) Allow 14 days between applications, up to a maximum of 48 ounces per acre per year. 8 - 16 oz. ORNAMENTALS (Trees, shrubs, annuals, perennials, bulbs and other ornamentals) Allow 14 days between applications, up to a maximum of 48 ounces per acre per year 8 - 32 oz. - Mixing Instructions
Mixing of Gro-Gard: Fill the spray tank ½ to ¾ full with clean water. Add the desired amount (weight) of Gro-Gard to the spray tank while agitating. Add other products, adjuvants or surfactants and then fill the remainder of the tank with water.
Tank-Mix Combinations with Gro-Gard: When Gro-Gard is used in combination with other products, refer to the respective labels for rates and methods of application, proper timing, restrictions and precautions. Always use in accordance with the most restrictive label restrictions and precautions. Do not exceed any label dosage. Adjuvants and Surfactants: Use a silicone-based surfactant at the lowest recommended label rates for foliar sprays (typically 8 ounces surfactant per 100 gallons). If Gro-Gard is tank-mixed with other products which prohibit surfactant use, do not use a surfactant. Application of Gro-Gard: Apply uniformly with properly calibrated spray equipment in 20 to 100 gallons of water per acre. Hollow cone nozzles are recommended, however, other types of nozzles which achieve thorough and uniform wetting of the turf grass or plant are acceptable. Allow heavy dew to evaporate prior to Gro-Gard applications.
Compatibility Testing: Gro-Gard is compatible with most commonly used fungicides, insecticides, micronutrients and spray adjuvants. If compatibility with another product is unknown, a “jar test” for physical compatibility should be conducted before field mixtures are made. Read and recognize all cautions and limitations on labeling of all products used in mixtures.
Adjuvants and Surfactants: Use a silicone-based surfactant at the lowest recommended label rates for foliar sprays (typically 8 ounces surfactant per 100 gallons). If Gro-Gard is tank-mixed with other products which prohibit surfactant use, do not use a surfactant. Application of Gro-Gard: Apply uniformly with properly calibrated spray equipment in 20 to 100 gallons of water per acre. Hollow cone nozzles are recommended, however, other types of nozzles which achieve thorough and uniform wetting of the turf grass or plant are acceptable. Allow heavy dew to evaporate prior to Gro-Gard applications.
Do not apply near water, storm drains, or drainage ditches. Do not apply if heavy rains are expected.
Properties
- Physical Form
Safety & Health
- Precautionary Statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear eye/face protection and protective gloves/ clothing. Wash thoroughly after handling. First Aid: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention. If on skin: Wash with plenty of water. Take off contaminated clothing and wash before reuse. If skin irritation occurs, get medical attention. If exposed of concerned, get medical attention. Storage and Disposal: Do not contaminate water, food or feed by storage or disposal. Keep out of reach of children. Store locked up. Dispose of contents/container in accordance with local regulations.
Packaging & Availability
- Packaging Type
- Available In
Available in 6, 64 oz jugs/case.