Products

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton MD1648 M is a linear triblock based on styrene and ethylene/butylene. It has a nominal 220 MFR (230C @ 2160g) and is in the enhanced rubber segment (ERS) family of polymers. It is supplied from North America in the physical form shown below. Kraton MD1648 MO - supplied as an organic dusted pellet. Kraton MD1648 M is used for melt blown elastics, compounding, and adhesive formulating. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton MD6951 M is a clear, triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 34%. It is supplied from North America in the physical form outlined below. Kraton MD6951 MS - supplied as a dense pellet dusted with silica The product exhibits the following characteristics: 1. high strength 2. high flow characteristics

Kraton G1645 V is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from Taiwan in the physical form identified below. Kraton G1645 VO - supplied as a dusted, dense pellet The product exhibits the following characteristics: Supplied as a dusted, dense pellet in small plastic bags and lined bulk box. Enhanced midblock for increased compatibility with polypropylene. Good UV and thermal stability as with all KRATON G type products. Low melt flow designed for stability in blown film applications.

Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1102 ET - supplied as a dusted porous pellet Kraton D1102 EU - supplied as an undusted porous pellet Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is supplied from Japan in the physical form identified below. DX405 JOP - supplied as dusted dense pellets. Kraton DX405 J is used in formulating adhesives, sealants and coatings and as a modifier of polymers. It is also used in compounds for technical applications.

Kraton D4150 A is a linear, oiled block copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Europe in the physical form identified below. Kraton D4150 AT - supplied as a porous pellet dusted with talc. Kraton D4150 A is suitable as an ingredient in formulating compounds for molded and extruded goods applications and may be used in formulating adhesives, sealants and coatings

Kraton DX1000 A is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied from Europe in the physical form(s) identified below. Kraton DX1000 AU - supplied as an undusted porous pellet Kraton DX1000 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1184 A is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: Kraton D1184 AS - supplied as porous pellets dusted with amorphous silica Kraton D1184 AT - supplied as porous pellets dusted with talc Kraton D1184 ASM - supplied as powder dusted with amorphous silica Kraton D1184 AIM - supplied as powder dusted with calcium carbonate for supply to the North American market Kraton D1184 A polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

Kraton D0246 E is a high vinyl, high diblock SBS polymer with bound styrene of 26% mass. The polymer contains uncoupled, dicoupled, and multi-coupled components. The major component is the uncoupled species. Kraton D0246 ET - supplied as a porous pellet dusted with talc Kraton D0246 E is used as a modifier of bitumen.

Kraton G1643 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from Taiwan in the physical form identified below. Kraton G1643 VS - is supplied as a dusted, dense pellet. Kraton G1643 V is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton DX421 J is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 16% mass. It is supplied from Japan in the physical form(s) below. Kraton DX421 JSP supplied as dusted, dense pellet. Kraton DX421 J is used in formulating adhesives, sealants and coatings. It is also used as a modifier of bitumen and polymers and in formulating compounds.

Kraton G1726 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from Taiwan in the physical form identified below. Kraton G1726 VS - is supplied as a dusted, dense pellet. Kraton G1726 V is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings.

Kraton G1750 V is a clear, multi-arm polymer based on ethylene/propylene. It is supplied from Taiwan in the physical form identified below. G1750 VO - supplied in a bale Kraton G1750 V is used as a modifier of polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Kraton DX418 J is a clear linear block copolymer based on styrene and isoprene, with bound styrene of 16% mass. It is supplied from Japan in one physical form, identified as follows. Kraton DX418 JSP supplied as dusted, dense pellet. Kraton DX418 J is used in formulating adhesives, sealants and coatings. It is also used as a modifier of bitumen and polymers and in formulating compounds.

Kraton DX422 J is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Japan in the physical form(s) identified below. Kraton DX422 JO - supplied as crumb dusted with organic dusting agent Kraton DX422 J is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton DX410 J is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 18% mass. It is supplied from Japan in the physical form(s) identified below. Kraton DX410 JS - supplied as dusted crumb Kraton DX410 J is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings.

Kraton DX414 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 52% mass. It is supplied from Japan in the physical form(s) identified below. DX414 JOP - supplied as dusted dense pellets. Kraton DX414 J is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings.

Kraton DX420 J is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 16% mass. It is supplied from Japan in the physical form(s) below. Kraton DX420 JSP supplied as dusted, dense pellet. Kraton DX420 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1113 K is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. D1113 KT - supplied as a dusted pellet Kraton D1113 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton DX407 J Polymer is a clear linear block copolymer based on styrene and butadiene, with bound styrene of 24% mass. It is supplied from Japan in the physical form identified below. DX407 JOP - supplied as dusted dense pellets. Kraton DX407 J is used in formulating adhesives, sealants and coatings and as a modifier of polymers. It is also used in compounds for technical applications. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton D1160 B is a clear linear triblock copolymer based on styrene and isoprene with bound styrene of 18.5% mass. It is supplied from South America in the physical form identified below. Kraton D1160 BT - supplied as a porous pellet dusted with talc Kraton D1160 B is used in formulating adhesives, in particular hot melt pressure sensitive adhesives.

Kraton DX408 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 43% mass. It is supplied from Japan in the physical form identified below. Kraton DX408 JOP - supplied as dusted porous pellets. Kraton DX408 J is used as a modifier of polymers and used in formulating adhesives, sealants and coatings. It can be used in compounds for technical and footwear applications

Kraton DX415 J is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 35% mass. It is supplied from Japan in the physical form(s) below. Kraton DX415 JSP supplied as dusted, dense pellet. Kraton DX415 J is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton DX406 J is a clear, linear block copolymer based on styrene and isoprene with bound styrene of 16% mass. It is supplied from Japan in the physical form(s) below. Kraton DX406 JSP supplied as dusted, dense pellet. Kraton DX406 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton D1101 E polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: Kraton D1101 ES - supplied as porous pellets dusted with amorphous silica Kraton D1101 ET - supplied as porous pellets dusted with talc Kraton D1101 ESM - supplied as powder dusted with amorphous silica Kraton D1101 E polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.