Products

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton G1726 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1726 MS - is supplied as a dusted, dense pellet. Kraton G1726 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU - supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton G4609 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 45.5%w (90 parts/100 parts rubber (phr)). It is supplied from North America iin the physical form identified below. Kraton G4609 HI - supplied as a dusted powder Kraton G4609 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4609 H in applications that must withstand weathering and high processing temperatures.

Kraton G1651 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1651 H in applications that must withstand weathering and high processing temperatures. Kraton G1651 HU - supplied as an undusted powder/fluffy crumb Kraton G1651 HS - supplied as a dusted powder/fluffy crumb Kraton G1651 HF - supplied as a dusted powder Kraton G1651 H is a clear, linear copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below.

Kraton G1702 H is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. Kraton G1702 HU - supplied as an undusted powder Kraton G1702 HF - supplied as a dusted powder Kraton G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1650 MU - supplied as a powder Kraton G1650 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton MD1648 M is a linear triblock based on styrene and ethylene/butylene. It has a nominal 220 MFR (230C @ 2160g) and is in the enhanced rubber segment (ERS) family of polymers. It is supplied from North America in the physical form shown below. Kraton MD1648 MO - supplied as an organic dusted pellet. Kraton MD1648 M is used for melt blown elastics, compounding, and adhesive formulating. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.

Kraton G1652 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 MU - supplied as an undusted powder Kraton G1652 MF - supplied as a dusted powder Kraton G1652 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Kraton D1165 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1165 PT - supplied as a dusted dense pellet Kraton D1165 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton™ G1652 MU by Kraton is commonly used as Coating Resin for a variety of applications. It is available in Powder form.

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton MD1646 V is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from Taiwan in the physical form identified below. Kraton MD1646 VO - supplied as a dusted, dense pellet The product exhibits the following characteristics: Enhanced midblock for increased compatibility with polypropylene. Good UV and thermal stability as with all KRATON G type products. Good melt flow designed for good processibility of compound in applications such as medical tubing.

Kraton D1161 J is a clear linear block copolymer based on styrene and isoprene with bound styrene of 15% mass. It is supplied from Japan in the physical form(s) identified below in the grade nomenclature. Kraton D1161 JSP - supplied as dusted dense pellets Kraton D1161 JS - supplied as dusted crumb Kraton D1161 JU - supplied as undusted crumb Kraton D1161 J is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers.

Kraton MD6951 M is a clear, triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 34%. It is supplied from North America in the physical form outlined below. Kraton MD6951 MS - supplied as a dense pellet dusted with silica The product exhibits the following characteristics: 1. high strength 2. high flow characteristics

Kraton G4610 H is a white mineral oil extended linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 33%. Nominal oil content of the polymer is 31%w (45 parts/100 part rubber (phr). It is supplied from North America in the physical form identified below. G4610 HU - supplied as an undusted powder crumb. Kraton G4610 H is used as a base material for thermoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G4610 H in applications that must withstand weathering and high processing temperatures.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied from Europe in the physical forms identified as follows in the grade nomenclature: D1101 AT - supplied as porous pellets dusted with talc D1101 AS - supplied as porous pellets dusted with amorphous silica D1101 AU - supplied as porous pellets undusted D1101 ASM - supplied as powder dusted with amorphous silica D1101 AIM - supplied as powder dusted with calcium carbonate for supply to the North American market D1101 ATM - supplied as powder dusted with talc for the South American market Kraton D1101 A polymer is used as a modifier of bitumen in roofing felt compounds, roads and pipe coating. It may also be suitable for use in formulating adhesives, sealants and coatings and in the modification of polymers.

Kraton D1152 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1152 ES - supplied as porous pellets dusted with amorphous silica Kraton D1152 ET - supplied as porous pellets dusted with talc Kraton D1152 ESM - supplied as powder dusted with amorphous silica Kraton D1152 E is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton G1654 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton G1654 HU - supplied as an undusted powder Kraton G1654 H is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 H in applications that must withstand weathering and high processing temperatures.

Kraton G1645 V is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from Taiwan in the physical form identified below. Kraton G1645 VO - supplied as a dusted, dense pellet The product exhibits the following characteristics: Supplied as a dusted, dense pellet in small plastic bags and lined bulk box. Enhanced midblock for increased compatibility with polypropylene. Good UV and thermal stability as with all KRATON G type products. Low melt flow designed for stability in blown film applications.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is supplied from Europe in the physical forms identified below. Kraton G1633 EU - supplied as undusted fluffy crumb Kraton G1633 ES - supplied as fluffy crumb dusted with amorphous silica Kraton G1633 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures.

Kraton G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is supplied from North America in the physical form identified below. Kraton G1643 MS - is supplied as a dusted, dense pellet. Kraton G1643 M is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton G1657 V is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied from Taiwan in the physical form identified below. Kraton G1657 VS - is supplied as a dusted, dense pellet. Kraton G1657 V is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1102 ET - supplied as a dusted porous pellet Kraton D1102 EU - supplied as an undusted porous pellet Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton G1654 E polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is supplied from Europe in the physical form shown below. Kraton G1654 ES - supplied as a "fluffy" crumb dusted with amorphous silica Kraton G1654 E is used as a base material for themoplastic elastomer (TPE) compound formulations for a variety of applications. It is also used as a modifier of thermoplastics and bitumen. The inherent stability of SEBS polymers suggests the use of G1654 E in applications that must withstand weathering and high processing temperatures.

Kraton DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is supplied from Japan in the physical form identified below. DX405 JOP - supplied as dusted dense pellets. Kraton DX405 J is used in formulating adhesives, sealants and coatings and as a modifier of polymers. It is also used in compounds for technical applications.

Kraton D4150 A is a linear, oiled block copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from Europe in the physical form identified below. Kraton D4150 AT - supplied as a porous pellet dusted with talc. Kraton D4150 A is suitable as an ingredient in formulating compounds for molded and extruded goods applications and may be used in formulating adhesives, sealants and coatings

Kraton™ D1152 ES by Kraton is commonly used as Coating Resin for a variety of applications. It is available in Pellets form.

Kraton D1155 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Japan in the physical form(s) outlined in the grade nomenclature below. D1155 JOP - supplied as dusted dense pellets D1155 JO - supplied as dusted crumb Kraton D1155 J is used as a modifier of polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings.