Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Main Properties
SOLLAFORM 2009 presents typical properties of Poly Acetal Copolymers
• Excellent Dimensional Stability
• Good Mechanical Properties
• Good Thermal Resistance up to 100 OC continuous
• Low Coefficient of Friction
• High Stiffness- Main Properties
SOLLAFORM 2059 presents properties typical of Poly Acetal Copolymers, with optimization of impact properties.
• Excellent Dimensional Stability
• Good Mechanical Properties
• Good Thermal Resistance up to 100 OC continuous
• Low Coefficient of Friction
• High Stiffness- Main Properties
SOLLAFORM 327 presents properties typical of Poly Acetal Copolymers, with optimization of impact properties.
• Excellent Dimensional Stability
• Good Mechanical Properties
• Good Thermal Resistance up to 100 OC continuous
• Low Coefficient of Friction
• High Stiffness
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
SOLLAFORM 2009 is indicated for parts that need Rigidity, Dimensional Stability and Good Impact Resistance.
- Applications
SOLLAFORM 2059 is indicated for parts that need Rigidity, Dimensional Stability and Good Impact Resistance.
- Applications
SOLLAFORM 3027 is indicated for parts that need Rigidity, Dimensional Stability and Good Impact Resistance.
Properties
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Weight | 1.41 | g/cm³ | ISO D792 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 64 | MPa | ISO D638 |
| Traction Module | 2800 | MPa | ISO D638 |
| Elongation At Break | 3 | % | ISO D638 |
| Bending Strength | 80 | MPa | ISO D790 |
| Reflection Module | 2500 | MPa | ISO D790 |
| Rockwell Hardness | 75 | Climb | ISO D785 |
| Izod Cp Notched Impact Resistance | 58 | J/M | ISO D256 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature | 166 | ºC | — |
| Continuous Heat Resistance | 80 | ºC | — |
| Deformation Temperature Under Load 1.82 Mpa | 95 | ºC | ISO D648 |
| Deformation Temperature Under Load 0.46 Mpa | 115 | ºC | ISO D648 |
| Value | Units | Test Method / Conditions | |
| Shrinkage In Molding | 2.2-2.5 | % | — |