Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features and Benefits
- Satisfaction guaranteed
- 100% acrylic roof coating
- Provides maximum adhesion to all surfaces
- Provides an excellent surface for application of Kool Seal Elastomeric Finish Coats
Applications & Uses
- Compatible Substrates & Surfaces
- Recommended Uses
- Metal, single ply, smooth BUR, modified bitumen, polyurethane foam, concrete, existing asphaltic and elastomeric roof coatings and other approved surfaces.
- Not for use on roof shingles
- Drying Time
Exposure to rain or heavy dew: 4-6 hours
Between coats and before foot traffic: 24 hours minimum
- Coverage Rate
Apply at 50-100 sq ft per gallon per coat. Two coats recommended. Rough/porous surfaces will require additional coating. Two coats recommended. Must be top coated with Kool Seal Elastomeric Finish Coats.
- Surface Preparation
Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup.
Surface must be power washed (minimum 2,000 psi) to remove dirt, and other foreign matter which could prevent proper adhesion. Surfaces must be completely dry prior to coating.
Important: Where ponding water conditions persist beyond 48 hours, roof drains or other corrective measures must be installed to eliminate water build-up prior to coating the roof. Repair all cracks, breaks, open seams and other imperfections with Kool Seal® Storm Patch® Acrylic Patching Cement and Kool Seal® Storm Patch® Polyester Fabric. Apply Kool Seal ® Storm Patch® Acrylic Rust Primer to existing rusted areas.
- Application
Do not apply below 50°F (10°C) or when rain is forecast. Applications during periods of low temperature and high humidity will extend dry time. Keep From Freezing.
Thoroughly mix product prior to and during application. Insufficient agitation will result in diminished reflectivity and aluminum appearance. Airless spray or apply with a low nap roller or broom at the appropriate coverage rate. Allow adequate drying time between coats. Two coats recommended.
- Clean Up
Warm, soapy water
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
VOC | max. 50 | g/L | - |
Solids (by Volume) | 31 - 35 | % | - |
Solids (by Weight) | 41 - 45 | % | - |
Safety & Health
- Cautions
- Use with adequate ventilation.
- Keep out of the reach of children.
- Use a NIOSH-approved respirator when necessary.
- Do not take internally.
- In case of ingestion, Call a Physician immediately. Do not induce vomiting.
- If splashed in the eyes, flush thoroughly with clean water for a minimum of 15 minutes. Call a Physician immediately. May cause irritation to the skin. If brought into contact with the skin, wash thoroughly with soap and water. Seek medical attention if redness or irritation occurs. Avoid breathing vapors and spray mist. Reseal container after each use. Wear protective clothing, gloves and goggles.
Packaging & Availability
- Packaging Type
- Ordering Information
Part Number Color/Size KS0034600-16 Gray (0.9 gallon)
KS0034600-20 Gray (4.75 gallon pail)