Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- VOC compliant.
- Fast Drying.
- Resistant to vapor, splash, and spillage of many chemicals and acids.
- Performs as a resilient, tightly adhering protective film when applied to: primed ferrous and non-ferrous metal, galvanized steel, masonry, fiberglass, transite and most construction, insulation and roofing materials, protecting them from the ravages of time, weather, and hostile environments.
- Single component.
- Intermediate and finish coat in the L & L moisture and air-flow reinforced systems.
- Contains no lead, mercury, or asbestos
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Primary Uses
- Architectural restoration.
- Urethane Foam and galvanized steel roof-deck weather and waterproofing.
- Above grade masonry damp proofing.
- Air-flow management (e.g. in nuclear power facilities and tobacco storage warehouse.
- Thermal-insulation weather barrier.
- Protective coating and repairs for single-ply roofing systems.
- Dust control: Seals joints and seams on conveyors, dust collectors, elevators, and other material handling equipment.
- Application Equipment
Brush: Best results will be achieved using brushes with hog or other animal bristles. Quality nylon-bristle brushes may also be used.
Roller: Pressure fed or hand roller with 1" to 1½" nap cover.
Airless Spray Pump: Graco Bulldog 3:1 No. 221-061 fed by Graco Monarch 5:1 transfer pump No. 206-393
Fluid Hose: 3/8" or ½" ID with ¼" ID whip-end section
- Recommended Substrate Condition
All surface to be coated must be clean, dry and free of dirt, oil, grease, mildew, rust, wax, chalking or peeling coating and any foreign matter which could prevent proper adhesion. Never apply to surfaces which pond water.
- Theoretical Spreading Rate Chart
Brush, Roller & Airless Spray Grade:
Dry Film Thickness Wet Film Thickness Ft² Per Gallon Gallons Per 100 Ft²
1 mil 1.88 mil 853 0.1173 5 mil 9 mil 171 59 10 mil 19 mil 85 1.17 15 mil 28 mil 57 1.76 20 mil 38 mil 43 2.35 25 mil 47 mil 34 2.93 Trowel & Palm Grade:
Dry Film Thickness Wet Film Thickness Ft² Per Gallon Gallons Per 100 Ft²
(1/32") 31 mil 58 mil 27 3.64 (1/16") 62 mil 117 mil 13 7.27 (1/8") 125 mil 235 mil 7 14.66 (1/4") 250 mil 470 mil 3.4 29.33 Note: The actual spreading rate depends on a number of factors such as: Surface profile and porosity, weather conditions, over-spray and application techniques. Use a wet film thickness gage at regular intervals during application.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Tempetaure Range | 40 - 125 | °F | — |
| Density | 10.52 | lbs/gal. US | ASTM D1475 |
| Dry (Recoat) | 3.0 | Hours | — |
| Dry (Through) | 2.5 | Hours | — |
| Dry (To Touch) | 2.0 | Hours | — |
| Service Temperature Range | 33 - 275 | °F | — |
| Tensile Elongation | 958.72 | % | ASTM D2370 |
| Volume Solids | 53.45 | % | ASTM D2697 |
| Water Vapor Permeability | 0.7651 | Perm .in | ASTM D1653 |
Regulatory & Compliance
- Quality Standards
Technical Details & Test Data
- Viscosity
L&L 300 Mastic is manufactured in three thixotropic viscosities:
- "Light" brush, roller & airless spray grade
- "Standard" brush, roller & airless spray grade
- Trowel and palm grade
When choosing viscosity range, consider factors such as surface profile and porosity, required film thickness and application methods.
Packaging & Availability
- Packing / Shipping
Unit Shipping Weight (Approx)
One gallon pail, per carton 11.5 Ibs. Four one gallon pails, per carton 45.0 1bs. Five gallon pail 53.5 1bs. Fifty-five gallon drum 600 lbs.
Storage & Handling
- Handling and Storage
L&L 300 Mastic requires no mixing or thinning. Cleans up with soap and water when wet. Xylene required to remove dried material. Protect from freezing. Never apply at temperatures below +40°F. or when freezing temperatures are likely to occur before mastic cures. Discontinue application three hours before sunset. Do not apply when rain is likely to occur. Shelf-life: 18 months when stored indoors at +40°F. to +100°F. Keep container sealed when not in use. Read and understand Material Safety Data Sheets before using product.