Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
VOC compliant.
Fast Drying.
Resistant to vapor, splash, and spillage of many chemicals and acids.
Performs as a resilient, tightly adhering protective film when applied to: primed ferrous and non-ferrous metal, galvanized steel, masonry, fiberglass, transite and most construction, insulation and roofing materials, protecting them from the ravages of time, weather, and hostile environments.
Single component.
Intermediate and finish coat in the L & L moisture and air-flow reinforced systems.
Contains no lead, mercury, or asbestos
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Primary Uses
Re-coating compromised polyurethane foam roof decks.
Polyurethane foam weather barrier finish coat.
Bright White finish on epoxy primed steel storage tanks.
Architectural restoration.
Above grade masonry damp proofing.
Dust control: Seals joints and seams on conveyors, dust collectors, elevators, and other material handling equipment.
- Application Equipment
Methods of Application: L&L 300 RCM Mastic can be brushed , rolled or sprayed. Rollers: 1" to 1½" nap. Airless spray equipment: Graco Bulldog 33:1 Pump # 237-435 fed by a Graco Monark 5:1 Transfer Pump # 224-350. Fluid hose requirements: 3/8" ID with ¼" ID whip-end section. Graco Gold or Silver Airless spray gun equipped with a .015" - .029" Graco Reverse-a-Clean tip. Spray equipment with specifications equal to or exceeding those listed above are available and may be used as well.
- Recommended Substrate Condition
Repair substrate and replace blistered polyurethane foam in accordance with the society of Plastics Industry (Spray Polyurethane Foam Division) recommended design consideration and guide specification. All surfaces to be coated must be clean, dry and free of dirt, oil, grease, mildew, rust, wax, chalking or peeling coatings and any foreign matter, which could prevent proper adhesion. Never apply to surfaces which pond water. We recommend L&L POWER PREP + as a pre-wash cleaner. It is fast and efficient and leaves no residue.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Density | 11.75 | Ib. per gallon | ASTM D1475 |
Permeability | 61.02 | Perms | ASTM D1653 |
Tensile Elongation (at break 75°) | 362.0 | % | ASTM D2370 |
Tensile Strength | 218.0 | lb. per inch | ASTM D2370 |
Total Solids | 68.56 | % | — |
Technical Details & Test Data
- Viscosity
L&L 300 Mastic is manufactured in three thixotropic viscosities:
- "Light" brush, roller & airless spray grade
- "Standard" brush, roller & airless spray grade
- Trowel and palm grade
When choosing viscosity range, consider factors such as surface profile and porosity, required film thickness and application methods.
Packaging & Availability
- Packing / Shipping
Unit Shipping Weight (Approx)
One gallon pail, per carton 13.10 lbs. Four one gallon pails. per carton 51.45 Ibs. Five gallon pail 61.55 lbs. Fifty-five gallon drum 688.50 lbs.
Storage & Handling
- Handling and Storage
L&L 300 RCM Mastic requires no mixing or thinning. Cleans up with soap and water when wet. Xylene required to remove dried material. Protect from freezing. Never apply at temperatures below +40°F. or when freezing temperatures are likely to occur before mastic cures. Discontinue application three hours before sunset. Do not apply when rain is likely to occur. Shelf-life: 19 months when stored indoors at +40°F. to +100°F. Keep container sealed when not in use. Read and understand Material Safety Data Sheets before using product.