Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
AB RUST®MSv2 is mainly recommended for:
- flash-rust protection of water based paints and varnishes based on acrylic, styrene-acrylic, alkyd, epoxy, polyurethane dispersions or emulsions
- in-can protection for metal packaging filled with above products
AB RUST®MSv2 must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:
- typically, from 1.0 to 1.5% based on the total weight
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.
Properties
- Appearance
- Yellowish to Amber Liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Density at 20°C | 1.14-1.18 | - | - |
pH at 20°C | 8.3-8.9 | - | - |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Labeling
AB RUST®MSv2 is not classified according to the Regulation EC N°1272/2008.
- Regulatory Information
- EINECS (Europe)
- TSCA (USA)
- DSL (Canada)
- AICS (Australia)
Technical Details & Test Data
- Solubility
Water soluble in all proportions.
- Comments
- AB RUST®MSv2 contains a corrosion inhibitor specific for copper.
- AB RUST®MSv2 is also active on steels, aluminum.
Packaging & Availability
- Packaging Type
- Packaging
- Polyethylene pails of 20 kg and 35 kg net
- Metallic drums of 250 kg net
- Polyethylene IBC of 1200 kg net
- Non-returnable packages
Storage & Handling
- Storage-Shelf Life
It is recommended to use AB RUST®MSv2 within 2 years following its manufacture (see the expiration date on the label).