Products

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® SF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Teccore® TG120 creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.

Soric® LRC 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Teccore® TG90 creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 6 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® Xi 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Teccore® TG180HP creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.

Soric® XF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® TF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® TF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® Xi 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 5 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® XM 10 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process.

Coremat® XM 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.