Latamid™ 66 BH2 G/30

Identification & Functionality

Chemical Family

Polyamides

Fillers Included

Glass Fiber

Polymer Name

Polyamide 66 (PA 66)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Heat Stabilized,

High Flow

Applications & Uses

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength - at Break (5 mm/min, 23°C)	175	MPa	ISO 527
Tensile Strength - at Break (5 mm/min, 60°C)	130	MPa	ISO 527
Tensile Strength - at Break (5 mm/min, 90°C)	105	MPa	ISO 527
Tensile Strength - at Break (5 mm/min, 120°C)	95	MPa	ISO 527
Tensile Strength - at Break (5 mm/min, 150°C)	80	MPa	ISO 527
Tensile Elongation - at Break (5 mm/min, 23°C)	3.4	%	ISO 527
Tensile Elongation - at Break (5 mm/min, 60°C)	5.5	%	ISO 527
Tensile Elongation - at Break (5 mm/min, 90°C)	7.8	%	ISO 527
Tensile Elongation - at Break (5 mm/min, 120°C)	8.8	%	ISO 527
Tensile Elongation - at Break (5 mm/min, 150°C)	9.3	%	ISO 527
Elastic Modulus (Tensile Speed - 1 mm/min, 23°C)	8200	MPa	ISO 527
Elastic Modulus Tensile Speed ( 1 mm/min, at 60°C)	6000	MPa	ISO 527
Elastic Modulus Tensile Speed ( 1 mm/min, at 90°C)	4400	MPa	ISO 527
Elastic Modulus Tensile Speed ( 1 mm/min, at 120°C)	3900	MPa	ISO 527
Elastic Modulus Tensile Speed ( 1 mm/min, at 150°C)	3400	MPa	ISO 527
Charpy Unnotched Impact Strength ( +23°C)	90	kJ/m2	ISO 179-1eU
Charpy Notched Impact Strength (+23°C)	12	kJ/m2	ISO 179/1eA

Physical Properties

	Value	Units	Test Method / Conditions
Moisture Absorption (Air, After 24Hrs)	0.27	%	ISO 62-4
Linear Shrinkage at Moulding - Longitudinal (2.0mm/60Mpa)	0.35/0.65	%	ISO 294-4
Linear Shrinkage at Moulding - Transversal (2.0mm/60Mpa))	0.75/1.05	%	ISO 294-4
Dimensional stability	45	-	--
Density	1.36	g/cm3	ISO 1183/A

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature - HDT (0.45 mn/m2)	260	°C	ISO 75
Heat Deflection Temperature - HDT (1.81 mn/m2)	245	°C	ISO 75
Vicat Softening Point - VST (50 N, eating Rate 50°C/H)	255	°C	ISO 306
Coefficient of Linear Thermal Expansion - CLTE - (Longitudinal, +30°C to +100°C)	45	μm/(m·°C)	ISO 11359-2
Continuous Use Temperature - C.U.T (Long Period, 20,000H)	130	°C	ASTM E1641/E1877

Electrical Properties

	Value	Units	Test Method / Conditions
Surface Resistivity	1.00E+12	ohm	IEC 60093