Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength - at Break (5 mm/min, 23°C) | 22 | MPa | ISO 527 |
Tensile Elongation - at Break (5 mm/min, 23°C) | 1 | % | ISO 527 |
Elastic Modulus (Tensile Speed - 1 mm/min, 23°C) | 3500 | MPa | ISO 527 |
Charpy Unnotched Impact Strength ( +23°C) | 5 | kJ/m2 | ISO 179-1eU |
Charpy Notched Impact Strength (+23°C) | 1 | kJ/m2 | ISO 179-1eA |
Value | Units | Test Method / Conditions | |
Linear Shrinkage at Moulding - Longitudinal (2.0mm/60Mpa) | 0.90/1.40 | % | ISO 294-4 |
Linear Shrinkage at Moulding - Transversal (2.0mm/60Mpa)) | 0.90/1.40 | % | ISO 294-4 |
Density | 1.45 | g/cm3 | STANDARD ISO 1183 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature - HDT (1.81 mn/m2) | 105 | °C | ISO 75 |
Heat Deflection Temperature - HDT (0.45 mn/m2) | 130 | °C | ISO 75 |
Vicat Softening Point - VST (50 N, eating Rate 50°C/H) | 110 | °C | ISO 306 |
Thermal Conductivity - In Plane | 5 | W/(m·K) | ASTM E 1461-92 |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 1.00E+12 | ohm | IEC 60093 |
Packaging & Availability
- Country Availability
- Regional Availability