Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Strength - at Break (5 mm/min, 23°C) | 160 | MPa | ISO 527 |
| Tensile Elongation - at Break (5 mm/min, 23°C) | 1.5 | % | ISO 527 |
| Elastic Modulus (Tensile Speed - 1 mm/min, 23°C) | 14500 | MPa | ISO 527 |
| Friction Coefficient - Static | 0.26 | - | ASTM D 1894 |
| Friction Coefficient - Dynamic | 0.23 | - | ASTM D 1894 |
| Charpy Unnotched Impact Strength ( +23°C) | 45 | kJ/m2 | ISO 179-1eU |
| Charpy Notched Impact Strength (+23°C) | 8.5 | kJ/m2 | ISO 179/1eA |
| Wear Factor | 10× 10^-7 | mm3/(Nm) | ASTM D 3702 |
| Value | Units | Test Method / Conditions | |
| Linear Shrinkage at Moulding - Transversal (2.0mm/60Mpa)) | 0.40/0.60 | % | ISO 294-4 |
| Linear Shrinkage at Moulding - Longitudinal (2.0mm/60Mpa) | 0.10/0.25 | % | ISO 294-4 |
| Density | 1.72 | g/cm3 | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT (0.45 mn/m2) | 280 | °C | ISO 75 |
| Heat Deflection Temperature - HDT (1.81 mn/m2) | 265 | °C | ISO 75 |
| Vicat Softening Point - VST (50 N, eating Rate 50°C/H) | 260 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 1.00E+12 | ohm | IEC 60093 |
Packaging & Availability
- Country Availability
- Regional Availability