Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Flame Rating
- UL 94 HB
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Tensile Strength - at Break (5 mm/min, 23°C) | 55 | MPa | ISO 527 |
| Tensile Elongation - at Yield (5 mm/min, 23°C) | 3 | % | ISO 527 |
| Tensile Elongation - at Break (5 mm/min, 23°C) | 10 | % | ISO 527 |
| Elastic Modulus (Tensile Speed - 1 mm/min, 23°C) | 2200 | MPa | ISO 527 |
| Friction Coefficient - Static | 0.18 | - | ASTM D 1894 |
| Friction Coefficient - Dynamic | 0.14 | - | ASTM D 1894 |
| Charpy Unnotched Impact Strength ( +23°C) | 50 | kJ/m2 | ISO 179-1eU |
| Charpy Notched Impact Strength (+23°C) | 12 | kJ/m2 | ISO 179/1eA |
| Wear Factor | 4× 10^-7 | mm3/(Nm) | ASTM D 3702 |
| Value | Units | Test Method / Conditions | |
| Linear Shrinkage at Moulding - Longitudinal (2.0mm/60Mpa) | 0.55/0.75 | % | ISO 294-4 |
| Linear Shrinkage at Moulding - Transversal (2.0mm/60Mpa)) | 0.60/0.75 | % | ISO 294-4 |
| Density | 1.34 | g/cm3 | ISO 1183/A |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature - HDT (0.45 mn/m2) | 140 | °C | ISO 75 |
| Heat Deflection Temperature - HDT (1.81 mn/m2) | 125 | °C | ISO 75 |
| Vicat Softening Point - VST (50 N, eating Rate 50°C/H) | 140 | °C | ISO 306 |
| Value | Units | Test Method / Conditions | |
| Surface Resistivity | 1.00E+12 | ohm | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Flammability Rating (1.50 mm Thickness) | UL 94 HB | - | -- |
| Flammability Rating (3.00 mm Thickness) | V-1 | - | UL 94 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability