ULTRAPOLY

Ultrapoly™ 210 A is a high performance blend of tough, low COF polyethylene dispersed in a harddrying binder. Ultrapoly 210 A is recommended where abrasion, mar resistance, and slip are required. Ultrapoly 210 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time.

Ultrapoly™ 211 A is a PTFE modified version of Ultrapoly 210 A. Ultrapoly 211 A is a high performance blend of tough, low COF polyethylene/PTFE dispersed in a hard drying binder. Ultrapoly 211 A is recommended where a high degree of slip, heat resistance, and abrasion resistance are required. Ultrapoly 211 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time. Ultrapoly 211 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 211 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Ultrapoly™ 213 A is a fine particle size blend polyethylene/PTFE dispersed in a 100% non-volatile, hard-drying binder. Ultrapoly 213 A is recommended for both sheetfed and heatset inks where gloss retention, lubricity, abrasion and mar resistance are required. Ultrapoly 213 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 213 A to 1 part Fluoron™ 960 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Ultrapoly™ 215 A is a softer-bodied, pumpable version of Ultrapoly 211 A. Ultrapoly 215 A is a high performance blend of tough, low COF polyethylene/PTFE and is recommended where a high degree of lubricity, abrasion and mar resistance, heat resistance, and pumpability are required. Ultrapoly 215 A is a 100% non-volatile and fast-setting, protecting the film in the earliest stages of the printing process, while developing exceptional toughness over time. Ultrapoly 215 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 215 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended use level is 3 to 5%.

Ultrapoly™ 2300 A is a softer bodied, pumpable version of Ultrapoly 210 A. Ultrapoly 2300 A is a high performance blend of tough, low COF polyethylene dispersed in a hard-drying binder. Ultrapoly 2300 A is recommended where abrasion and mar resistance, slip, and pumpability are required. Ultrapoly 2300 A is a 100% non-volatile and fast-setting, protecting the film in the earliest stages of the printing process, while developing exceptional toughness over time. Ultrapoly 2300 A is coatable and may also be used for laser work, when combined with PTFE. For optimum heat resistance, we recommend using 3 parts Ultrapoly 2300 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 4 to 6%.