Products

Co-solvent soluble polyamide resin 100% Solids

Optilith™ AM A is an anti-mist compound. Optilith AM A is a 95% non-volatile, high solids paste. Optilith AM A gives maximum reduction in misting without adversely effecting gloss or ink rheology. Optilith AM A is effective at 0.5 to 3% use levels.

Alcohol soluble non film forming polyamide resin 100% Solids.

Co-solvent soluble polyamide resin 100% Solids

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.

Pineclear 4307 is used in Lacquer coatings, Specialty coatings, and Thermoplastic applications. Very low color, high viscosity and melt point for demanding thermoplastic applications.

Pineclear 4305 is used in Lacquer coatings, Specialty coatings and Thermoplastic applications. Very low color, requires less liquid plasticizer in finished applications.

Polysperse™ A is a linear hydrocarbon produced by the Fischer-Tropsch process. Polysperse A has a unique spherical morphology and narrow distribution of particles for ease of dispersion and uniformity during processing. Polysperse A exhibits low surface tension, exceptional surface slip and smoothness, rub resistance, gloss, and non-marking properties. Addition levels range from 0.5-3%, depending upon application requirements.

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.

Flex-Rez™ 2433AD A is Lawter™ polyamide resin. Flex-Rez 2433AD A has served as the industry standard for surface printing applications on films or paper. Flex-Rez 2433AD A has excellent wet-pack resistance, coupled with excellent adhesion on difficult substrates such as polyethylene, polypropylene, and coated foils.

Alcohol soluble polyamide resin 100% Solids.

Optirub™ SP1 A is a finely, micronized blend of tough polyethylene wax and premium grade PTFE. Optirub SP1 A is processed to a 6 micron average particle size and formulated to give a high degree of surface lubricity and rub resistance in inks and coatings. Addition levels range from 0.5 to 3%, depending upon application requirements.

Alcohol soluble polyamide resin 100% Solids.

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

Flex-rez 1255 AS combines excellent alcohol solubility with nitrocellulose compatibility to produce flexographic inks having excellent gloss and runnability. It exhibits excellent tolerance for ester solvents. The high degree of compatibility along with high solubility makes Flex-rez 1255 AS an excellent polyamide for pigment wetting applications. Additionally, Flex-rez 1255 AS has outstanding gel resistance and can be used to improve gel characteristics when combined with traditional polyamide resins. Flex-rez 1255 AS has excellent adhesion on all difficult substrates.

Optirub™ PC A is a finely micronized, polyethylene and carnauba blend processed to an 8 micron average particle size. Optirub PC A is recommended for applications where gloss retention, clarity, or inter-coat adhesion is important. In addition, Optirub PC A provides an excellent combination of slip, wet scuff, mar and block resistance. Optirub PC A is not recommended for recoating, imprinting, gluing, and die-stamping applications. Recommended usage level is 1 to 3%.