PolyDyne™ 200

PolyDyne™ 200 is a free flowing powdered material that easily disperses in formulations and can provide significant cost savings without sacrificing performance. Its fine particle gives smooth surfaces on extruded rubber parts and may provide longer fatigue life in rubber parts used in a dynamic application than typical crumb rubber. Is considered a “green” material as it is made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.

Technical Data Sheet

TypeDocument Name

View All Documents

Knowde Enhanced TDS

Properties

Typical Properties
Particle Size Distribution

	Value	Units	Test Method / Conditions
Fiber Content	Max. 0.01	%	ASTM D5603
Moisture Content	Max. 0.5	%	ASTM D1509
Polymer RHC	Min. 42	%	ASTM E 1131-03 (Pyris 1 TGA)
Carbon Black	25-35	%	ASTM E 1131-03 (Pyris 1 TGA)
Metal Content	Max. 0.05	%	ASTM D5603
Inorganic Material	Max. 11	%	ASTM E 1131-03 (Pyris 1 TGA)

	Value	Units	Test Method / Conditions
Particle Size (Retained 88µ 170 Mesh )	Max. 1	%	ASTM D5644-01
Particle Size (Retained 74µ 200 Mesh )	Max. 10	%	ASTM D5644-01

Packaging & Availability

Packaging: Super Sacks: FIBC 2,000 lb & 1,000 lb nominal

Special moisture-proof if required

Paper Bags: 30 lbs

Skid Size: 40 X 48

Plastic Bags, regular or low melt

Total Skid Weight: 2,000 lbs./1 Ton

Bulk containers if required