Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Provides a seamless, elastic and durable membrane.
- Contains fungicides and mildewcides.
- Superior adhesion to various substrates.
- Reflective roof coating helps reduce cooling costs, and prevents UV degradation and premature roof failure.
- Vapor barrier coating withstands ponding conditions in low slope roofs.
Applications & Uses
- Installation
- Ready to use. Thinning is not necessary. Mix well before using.
- Roof must be clean, dry and free of any oil, grease, dirt or loosely adhered coating. Bare surfaces must be prepared and checked for compatibility.
- Follow our roof restoration procedures and always perform an adhesion test.
- Equipment: polyester brush, long nap roller, spreader or 3000psi, 3gpm airless sprayer with a .031 tip. Do not leave a coating in spray guns, hoses and pumps for prolonged periods.
- Clean Up
Xylene
- Coverage
- 1gal/100SF yields 7.2 dry mils.
- Up to 1.5gal/100SF per coat.
- 2 - 3 coats, 25 - 30 dry mils recommended.
Properties
- Color
- Technical Data
| Value | Units | Test Method / Conditions | |
| Cure Time (Dry To Touch) | 4.0 | h | - |
| Cure Time (Tack Free) | 8.0 | h | - |
| Cure Time (Recoat) | 4 - 10 | h | - |
| Elongation | 800 - 1000 | % | ASTM D-412 |
| Hardness | 45.0 | Shore A | - |
| Impact Resistance | min. 160 | in/lb | ASTM D-624 |
| Permeability | max. 1.11 | ng/s.m².pa | ASTM E-96 |
| Recovery | 100.0 | % | ASTM D-412 |
| Service Temperature | -50 to 200 | °F | - |
| Solar Reflectance | 0.87 | - | - |
| Solids by Volume | 40.0 | % | ASTM D-2697 |
| Solids by Weight | 45.0 | % | ASTM D-1644 |
| Tensile Strength | 900 - 1100 | psi | ASTM D-412 |
| Thermal Emittance | 0.87 | - | - |
| Viscosity | 2000 - 3000 | cP | - |
Packaging & Availability
- Packaging
5 gallon pail, 55 gallon drum
Storage & Handling
- Shelf Life
- 12 Months (40°F - 90°F)
- Caution
This product contains solvents. Keep away from open flame, heat or sparks. Pumping equipment should be grounded to avoid accidental ignition due to static sparks. Use only in ventilated areas and provide mechanical ventilation in enclosed spaces. Avoid breathing vapor or mist. Approved (MESA/NIOSH) chemical respirator and protective clothing must be used when exposure can exceed recommended PEL. Fresh air hose masks required for interior applications. Care must be taken to prevent rooftop HVAC from introducing solvent vapor into interior areas. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations.