Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Provides a seamless, elastic and durable membrane.
- Contains fungicides and mildewcides.
- Superior adhesion to various substrates.
- Reflective roof coating helps reduce cooling costs, prevents UV-degradation and premature roof failure.
- Easy to use, non-toxic, water based roof coating.
Applications & Uses
- Installation
- Ready to use. Thinning is not necessary. Mix well before using.
- Do not use on ponding water locations.
- Roof must be clean, dry and free of any oil, grease, dirt or loosely adhered coating. Bare surfaces must be prepared and checked for compatibility.
- Follow our roof restoration procedures and always perform an adhesion test.
- Equipment: polyester brush, long nap roller, spreader or 3000psi, 2gpm airless sprayer with a .031 tip. Do not leave coating in spray guns, hoses and pumps for prolonged periods.
- Clean Up
Water
- Coverage
- 1 gal/100SF yields 9.6 dry mils.
- Up to 1.5 gal/100SF per coat.
- 2 coats, 25 - 30 dry mils recommended.
Properties
- Color
- Technical Data
| Value | Units | Test Method / Conditions | |
| Application Temperature (max. 85% Relative Humidity) | 55 - 100 | °F | - |
| Density | 11.3 - 11.7 | lbs/gal | - |
| Dry Time (Dry To Touch, 75°F) | 4 - 6 | h | - |
| Dry Time (Recoat, 75°F) | 12 - 24 | h | - |
| Elongation | 239.0 | % | ASTM D-2370 |
| Emittance | 0.85 | - | ASTM C-1371 |
| Emittance (3 Years) | 0.89 | - | - |
| Hardness | 43 - 53 | Shore A | ASTM D-2240 |
| Low-Temperature Flexibility (Over 1/2" Mandrel, 77°F) | 180.0 | °flex | ASTM D-522 |
| Permeability | 6.5 | perms | ASTM E-1653 |
| Reflectance | 85.0 | % | ASTM C-1549 |
| Reflectance (3 Years) | 66.0 | % | - |
| Solar Reflectance Index | 106.0 | - | ASTM C-1371 |
| Solar Reflectance Index (3 Years) | 80.0 | - | - |
| Solids by Volume | 50 - 56 | % | ASTM D-2697 |
| Solids by Weight | 63 - 67 | % | ASTM D-1644 |
| Tear Resistance | 78.0 | lb.f/in | ASTM D-624 |
| Tensile Strength | 278.0 | psi | ASTM D-2370 |
| VOC | max. 50 | grams/liter | - |
| Viscosity | 94.0 | KU | ASTM D-562 |
Regulatory & Compliance
- Regulatory & Compliance
- Meets or exceed ASTM D-6083.
- VOC-Compliant
Packaging & Availability
- Packaging
5 gallon pail, 55 gallon drum
Storage & Handling
- Shelf Life
- 12 Months (40°F - 90°F)
- Caution
This product is water-based product which will freeze and become unusable at temperatures below 32°F. Suspend all application if conditions prevent a complete cure before sunset, rain, fog, dew or freezing temperatures. Lexis Coatings must be completely dry before exposing to water or foot traffic. Keep Lexis Coatings containers covered when not in use. Dispose of all containers in accordance with state and local environmental regulations.