company tower banner
Licharz Company Logo

LINNOTAM GLIDE Pro T

1 of 9 products in this brand
LINNOTAM GLIDE Pro T with solid lubricants, additives and stabilizers finely distributed in the material. LiNNOTAMGLIDE Pro T has self-lubricating properties due to the added components and shows excellent wear resistance at very high low coefficient of friction.

Polymer Name: Polyamide (unspecified)

Physical Form: Bars, Plates, Tube

Features: Good Sliding Properties, Low Friction, Self Lubricating, Wear Resistant

Density: 1140.0 - 1140.0 kg/m³

Color: Green, Grey, Red

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers End Uses
Application examples

● gears
● Plain bearings, strips, plates, bushings
● Ball head sockets
● Trapezoidal thread nuts
● Telescopic guides.

Properties

Flame Rating
Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Density1.14g / cm³ISO 1183
Yield Stress80MPaISO 527
Elongation at Break40%ISO 527
Modulus of Elasticity (Tensile test)3100MPaISO 527
Modulus of Elasticity (Bending test)3300MPaISO 178
Flexural Strength110MPaISO 178
Impact StrengthWithout breakKJ/m²ISO 179
Notched Impact Strengthmin. 4KJ / m²ISO 179
Ball Indentation Hardness (H358/30)160MPaISO 2039-1
Time Elongation Stress (1% elongation)min. 7MPaDIN EN ISO 899-1
Coefficient of Sliding Friction (Against steel)0.15
Sliding Wear (against steel)0.03μm / km
Melting Temperature220°CISO 3146
Thermal Properties
ValueUnitsTest Method / Conditions
Thermal Conductivity0.23W/(K m)DIN EN 12939
Specific Heat Capacity1.7J / (gK)
Coefficient of Linear Expansion7-810^5(K-1)
Temperature Range (long-term)(-40) - +105°C
Operating Temperature Range (short-term)160°C
Fire BehaviorHBUL 94, IEC 60695
Dielectric Constant3.7IEC 60250
Typical Properties
ValueUnitsTest Method / Conditions
Moisture Absorption (Normal climate to saturation)2.2%DIN EN ISO 62
Water Absorption (up to saturation)6.5%DIN EN ISO 62
Electrical Properties
ValueUnitsTest Method / Conditions
Dielectric Dissipation Factor0.03IEC 60250
Specific Volume Resistance10^19ΩcmIEC 60093
Surface Resistance10^13ΩIEC 60093
Dielectric Strength50kV/mmIEC 60243
Tracking ResistanceCTI 600-IEC 60112

Regulatory & Compliance

Certifications & Compliance