Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Outstanding Impact Resistance
- Good Melt Fluidity
- High Dimensional Stability
- Good Impact Strength
- Excellent Heat, Chemical and Abrasion resistance
- High Stiffness and Rigidity
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Mountings and Dowels for Furniture
- Casters
- Construction Brackets
- Clips and Fasteners
- Automotive – Sunroof Frames, Trim Panels
Properties
- Physical Properties
- Mechanical Properties
- Typical Properties
- Thermal Properties
- Impact Properties
- Product Properties
The indicated test values represent approximate values but are not binding maximum or minimum values. It is possible that the values may be influenced or may deviate due to tool design, processing conditions, etc. The test values do not represent any contractual assurances regarding the properties or the suitability of the product for a specific intended application. All of the information, approximate values, descriptions, drawings, etc. included in the product data sheet can change at any time and do not represent any contractually agreed properties of our product.
| Value | Units | Test Method / Conditions | |
| Density | 1.04 | g/cm³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Elongation at Break | min. 50 | % | ISO 527 |
| Flexural Modulus | 1900 | MPa | ISO 178 |
| Flexural Strength | 60 | MPa | ISO 178 |
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield | 40 | MPa | ISO 527 |
| Max. Moisture Content | 0.15 | % | — |
| Drying Temperature | 80 | °C | — |
| Drying Time | 2 - 4 | hrs | — |
| Melt Temperature | 240 - 285 | °C | — |
| Mold Temperatures | 65 - 80 | °C | — |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature (0.45 MPa) | 110 | °C | ISO 75 |
| Heat Deflection Temperature (1.8 MPa) | 53 | °C | ISO 75 |
| Value | Units | Test Method / Conditions | |
| Izod Notched Impact | 80 | kJ/m² | ISO 180 |
Safety & Health
- Product Safety
As long as the processing of our product is carried out in compliance with the processing instructions specified in the product data sheet, molten masses are thermally stable and are not a source of any danger due to molecular decomposition or the formation of gasses or vapor. According to the safety data sheet the user/processor is to ensure compliance with the specified occupational exposure limits through sufficient exhaust and ventilation in order to avoid any negative impact on the health and well-being of his/her employees. If processing is carried out at temperatures significantly below the specified processing temperatures then gaseous products of decomposition can form as a result of the partial decomposition of the polymer.