Iso-Flex 100 Epoxy Resin - Lymtal - Concrete & Masonry

Identification & Functionality

Chemical Family: Epoxy & Epoxy Derivatives
Product Type: 2K (2 component) Coating,
Epoxy Coating,
Solventless & High Solids Coating
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Paints & Coatings
Other Paints & Coatings

Features & Benefits

Ready-to-Use Product Features: Excellent Traction,
Wear Resistant

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Flooring & Surfaces
Floor Coatings
Compatible Substrates & Surfaces: Concrete
Basic Uses: As a base resin used as a coating, to encapsulate wear-resistant aggregates and as a lock coat.

As an overlay with aggregate, to provide traction and wear resistance to concrete floors.

Filled with silica sand, aluminum oxide or other suitable wear-resistant filler.
Limitations: Iso-Flex 100 Epoxy Resin should be installed above 40°F.

Keep from freezing.
Installation: Shotblasting must be employed to provide a sound, clean substrate. In areas where shot blasting is not feasible, consult the manufacturer for other methods of surface preparation.

Apply Iso-Flex 100 Epoxy Resin to a dry surface.
Coating System: Parts A and B should be mixed separately before combining.

When combined mix thoroughly with a low speed motor and "Jiffy" paddle.

Always scrape the container sides and paddle blades.

Do not aerate the mix.
Concrete Overlay: Use as a slurry coat to add strength and wear resistance.

Mix Parts A & B, then add fine silica sand, aluminum oxide or other suitable filler.

The amount added will dictate the resulting density and surface texture.

Iso-Flex Epoxy 100 Resin can be left as cured, or it can be top-coated with a urethane to enhance the color and wear resistance.
Maintenance: Iso-Flex 100 Epoxy Resin will provide a long, effective service life when properly used.

Damaged areas may be repaired in the field using methods approved by the manufacturer.

Properties

Technical Data
Chemical Resistance: Unaffected by gasoline, oils and coolants.

	Value	Units	Test Method / Conditions
Weight Per Gallon	10.1	Ibs/gal	-
Hardness	70 - 80	Shore D	ASTM D2240
Viscosity (77°F, 20 rpm)	4000 - 6000	cps	ASTM D2196 # 4 RVT
Cure Time (75°F)	12 - 24	hours	ASTM C920
Abrasion Resistance (Tabor 1000 Rev. CS17 Wheel, 1000g)	0.08	grams Loss	ASTM D4060
Weathering Resistance	Yellowing	-	ASTM G53-83
Tensile Strength	5800.0	psi	ASTM D412
Ultimate Elongation	15.0	%	ASTM D412
Tear Resistance	180.0	pil	ASTM DI004
Yield (Wet→Dry)	99.0	%	-

Safety & Health

Precautions: Epoxy systems are skin irritants.

Please refer to the Material Safety Data Sheets that accompany each product shipment for proper handling instructions.

Packaging & Availability

Packaging: Available in 5 gallon units.
Colors: Concrete Gray, Mortar Gray and Tan

Storage & Handling

Pot Life: 35 minutes (77°F)
Shelf Life: 2 years (In Sealed Containers, 77°F)

Iso-Flex® 100 Epoxy Resin

Knowde Enhanced TDS